I call again on my seti teammates to help me pick the right speed.

[killem1x1]

I have posted my possible speeds in this thread (http://forums.overclockers.ws/vb/showthread.php?threadid=64919) . Which do you think will crunch the best?

[Jon]

I would have to say 11 X 150 if you can't do 10 X 160.

[bobt17]

from what i'v done with my 1600+ i would say go for the highest fsb u can get while keeping your memory at 2-2-2 after u cant get any higher on fsb start to up the multiplier untill that hits its limit and then u should have your max crunching speed

seti loves memory speed :) even more then clock speed as far as i can tell because i'v run mine at 1.8ghz but my ram was running slower so seti crunched just about the same

[Wookie8662]

I agree with bobt17.

Keep your memory timings as fast as possible.

Then run the highest FSB speed that will stay 100% stable under any conditions. If it doenst run stable, then you will just be asking for more problems.

Find the best speed, and lock it in.
Then sit back and watch that baby crunch!