• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

Hello.I need help with my new system.Thank you for your time.

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

v00ka

New Member
Joined
Aug 15, 2010
Hello.I need help with my new system.EvgaX58 le + geil 3x2(9-9-9-24) + Antec quattro 850+Sapphire Radeon reference 5870.In 2d computer work perfect.Then i start any game after 1- 5 minutes black screen and computer freeze .I try everething another psu, reseat memory, check video card on another computer (work ok),put last bios 74.Put all setting by hands like timings and voltage but computer still freeze in 3d.Computer not overclocked.Fresh win 7 .I dont know what is can be.
 
Either post a direct link to your specific RAM, or post a pic. of CPU-Z open to both the Memory and SPD tabs. Also list your CPU, and fill out this BIOS template for the EVGA X58 LE w/ all of your current settings (just disregard the settings in the template, and replace w/ your own)...

Code:
Frequency Control 
CPU Clock Ratio ( 31X )                                                                                          
CPU Host Frequency (Mhz) ( 142 )                                                                       
MCH Strap ( Auto ) 
CPU Uncore Frequency (Mhz) ( 4156Mhz { 29X } )                                                 
CPU Clock Skew ( 0 ps ) 
Spread Spectrum ( Disabled ) 
PCIE Frequency (Mhz) ( 102 ) 

Memory Feature         
Memory Speed ( Standard ) 
Memory Control Setting ( Enabled ) 
Memory Frequency ( 1866Mhz / 2:14 )                                                                 
Channel Interleave Setting ( 6 Way ) 
Rank Interleave Setting ( 4 Way ) 
Memory Low Gap ( 2.5 ) 
tCL Setting ( 8 ) 
tRCD Setting ( 8 ) 
tRP Setting ( 8 ) 
tRAS Setting ( 24 ) 
tRFC Setting ( 88 ) 
Command Rate ( 1t ) 

Voltage Control 
EVGA VDroop Control ( Without VDroop ) 
CPU VCore ( 1.40 )                                                                                                 
CPU VTT Voltage ( +275 ) 
CPU PLL VCore ( 1.350 ) 
**IOH PLL VCore ( 1.350 )  
DIMM Voltage ( 1.65 ) 
DIMM DQ Vref ( +0mV ) 
QPI PLL VCore ( 1.275 ) 
IOH VCore ( Auto )   
IOH/ICH I/O Voltage ( Auto ) 
ICH VCore ( Auto ) 
PWM Frequency (xyz ) 

CPU Feature 
Intel SpeedStep ( Disabled ) 
Turbo Mode Function ( Enabled ) 
CxE Function ( Disabled ) 
Execute Disable Bit ( Disabled ) 
Virtualization Technology ( Disabled ) 
Intel HT Technology ( Enabled ) 
Active Processor Cores ( All ) 
QPI Control Settings ( Enabled ) 
QPI Link Fast Mode ( Enabled ) 
QPI Frequency Selection ( 6.400 GT/s ) 
OC Recovery ( Disabled ) 
Turbo Performance ( Disabled )  

PnP/PCI     PCI Express 
Maximum Payload Size ( 4096 ) 
  
Power Management Setup 
ACPI Suspend Type ( S3 )    
HPET Support ( Enabled )      
HPET Mode ( 64-bit )
 
Last edited:
Frequency Control
CPU Clock Ratio ( 31X )
CPU Host Frequency (Mhz) ( 142 )
MCH Strap ( Auto )
CPU Uncore Frequency (Mhz) ( 4156Mhz { 29X } )
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 102 )

Memory Feature
Memory Speed ( Standard )
Memory Control Setting ( Enabled )
Memory Frequency ( 1866Mhz / 2:14 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( 2.5 )
tCL Setting ( 9 )
tRCD Setting ( 9 )
tRP Setting ( 9 )
tRAS Setting ( 24 )
tRFC Setting ( 88 )
Command Rate ( 1t )

Voltage Control
EVGA VDroop Control ( Without VDroop )
CPU VCore ( 1.40 )
CPU VTT Voltage ( +275 )
CPU PLL VCore ( 1.350 )
**IOH PLL VCore ( 1.350 )
DIMM Voltage ( 1.65 )
DIMM DQ Vref ( +0mV )
QPI PLL VCore ( 1.275 ) Raising this will help you lower your VTT
IOH VCore ( Auto ) Set to 1.2 if you are using more then 1 video card
IOH/ICH I/O Voltage ( Auto )
ICH VCore ( Auto )
PWM Frequency (xyz )

CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 6.400 GT/s )
OC Recovery ( Disabled )
Turbo Performance ( Disabled )

PnP/PCI PCI Express
Maximum Payload Size ( 4096 )

Power Management Setup
ACPI Suspend Type ( S3 )
HPET Support ( Enabled )
HPET Mode ( 64-bit )
 
Guys one more question please:How to check CPU for errors?Maybe its CPU?
 
Back