PDA

View Full Version : Case Cooling


BerettaX
02-10-02, 12:31 AM
Post your cooling stuff here for your case... here is my setup

1 8cm fan on back "blows air out"
1 8cm fan on top "blows air out"
1 8cm fan on side "sucks air in"
1 8cm fan on front "sucks air in"

AMD Athlon XP 1600+ 140 FSB stable tempature 38 *C

cyber mouse45
02-10-02, 12:59 AM
This is what I plan to do, though I haven’t had time to put it together yet. (I just got my case and fans the other day.)

Twin 80mm on the bottom (Evercool)
Two 80mm in the back (Antec)
Two 80mm + HDD cooler in the front (sunon)
Blow hole on top with 80mm (Delta)
Another 80mm fan on top above the psu (Thermaltake)
Two 80mm on the left side (sunon)
And one 80mm on the right (sunon)
And last but not least, a Swiftech MCX-462 for my cpu

:) :) :)

aznboi64
02-10-02, 01:53 PM
I'm not going for that many fans but these are reasonable what I have....

2 92mm inlet Sanyo Denki Mini Ace25
1 80mm exhaust Sunon
black label delta w/ 7v mod w/vantec HSF.

I'm thinking of doing more when I get my Epox 8K7A w/T-Bird 1ghz O/C to 1.5ghz+. Right now I have a celly O/C from 600 to 945mhz. But right now my ambient temps never reach 26c. Maybe its because I live downstairs. Now I have to figure out where else I can put fans.

MoPMatrix
02-10-02, 02:51 PM
2 - 80mm(Antec) exhaust (also pullin air from the side of the HS)
2 - 80mm(Antec) Intake (1 in HD bay and moving air over the vid card also)
1- 80mm(Sunon) on CPU
2-80mm(Antec)In PSU
2-40mm - On the Video card
And 1 tinny fan on the MB chipset but that don't count :P

Voodoo Rufus
02-10-02, 03:42 PM
One 120mm L1A blowing in from the back at 10V, L1A power supply blowing out at 7V, and a 80mm hardwired Enermax 80mm at 5V.

Kato
02-10-02, 04:38 PM
INTAKE:
2 120mm Sunon

EXHAUST:
1 120mm Sunon
1 60mm Sunon
2 slot blower

80mm Detla at PSU

diehrd
02-10-02, 09:43 PM
2x30cfm Heat sink Fans{Ducted to side as inlets}

3x80mm intake,2x case side 1x front of case.

4x80mm exhaust

1 By cpu's
3 in upper areas.

Max temp 41c,If I use deltas 38cfm 39c

JimmyG
02-11-02, 11:12 AM
1 120 intake at bottom front.
1 120 intake on side over HSF.
1 dual 80 exhausting above hard drives.
1 empty grill on back below PS (this insures positive pressure)
PS has two fans, one blowing in to PS, one exhausting out back top of case.
HSF has Swiftech MC462 with 80x38 fan and radioshack pot to quiet it down when I'm just surfin'.

Max CPU 46C. Case 26C. Ambient 21C.

Jeniva
02-12-02, 12:37 AM
here ya go:
3 120MM Intakes
4 80mm Ehausts
..not including the 2 fans on my Vid card, the CPU cooler and the PSU fan...