Duron problem

[Spec_Ops2087]

I posted this before and this is the feedback...I tried a PCI video card after clear the CMOS and nothing happened...this was after I used the pencil trick to O/C it but that musted have shorted out on of the bridges...I have tried practly everything...100/133fsb all the multipler settings and Vcore settings....the monitor lights just stays on stand by but everything does turn on...tried disconnecting everything except the mobo...do you think I blew the whole chip out???

==>system specs<==
750mhz duron
FIC Az11E mobo
256 SDRAM
20gb HDD
350W P/S
Gf2 GTS

any suggestions would be much appreciated(typo?)

Spec

[Caffinehog]

Try an eraser on the bridges and boot again. It will probably work. If it does, try again. Also, my friend has an AZ11, and it is useless for overclocking. I don't think you can even change the multiplier in the bios.

[Spec_Ops2087]

eraser don't work..alchole don't work...I think the damn CPU died or somthing and it isn't that bad...you use jumpers to do the multiplyers.....



spec

[Batman@]

Hey I also have a Fic Az11E, the ones you guys are talking about without the multiplier are just the Fic Az11. In the fic az11E you can change the multiplier (if your chip is unlocked of course) in the bios, and also the motherboard comes with a porgram that lets your change it from windows.

my $.02

[Batman@]

Spec_Ops2087 <--- this is a question for you, I see that you have the Cambridge dtt2500 speakers. I heard really great things about them on the internet and am planning on buying them, you think they are worth it?

[Spec_Ops2087]

YESSSSSSSSSSSSSSSSS....GET THEM......so much power I was literlly (typo?) shaking the house with them turned up all the way!!! little problem though...wirring is a little difficult but took me no more thatn 45 min :)



ANYWAY though...back to the point...can anyone help me fix this stupid duron.....anyone...plz...I don't want to have to but another processor :(

[Kendle666]

Specops.............do you have another system that ya can swap out Cpu's to test if the Cpu is bad?.................also take out the cpu and look under the chip to see if there's any type of blemish..........like a chip or bubble in the center , if there is ya have a burn chip,...................I had a duron 800 that went like that ..........worked fine and then *poof* nada..............

[Spec_Ops2087]

you mean right under the core if there is somthing that resembles like oh a finger print...that means it is blowen out.....


Well f*ck me then(excuse the language)

spec

[Caffinehog]

Well, the good news is that you can get a brand new 950MHz duron for about $50 shipped on pricewatch....

[Spec_Ops2087]

;) lol...I think that I'm getting the 1.1ghz tbird w/ 200mhz FSB...this ghetto mobo dosen't support the fast tbirds :o