- Joined
- Nov 2, 2001
- Location
- Tulsa Oklahoma
Pics of my TH7II setup !Working Now!
Well I finally got my TH7II setup with water and peltier cooling.
It is incredible to watch those temps drop so dramatically when I power that thing up!
I have a P4 1.8A Northwood @ 2.4Ghz at 1.675v I think the CPU would do 2.4 at stock voltage but the memory needs more.
Plus, I have 512Mb Samsung with ECC, they are the 256Mb sticks which are not as easy to get to 533Mhz as the 128Mb sticks are.
You are also seeing a Visiontek GF3 ti500, 3Com Nic, and TurtleBeach Santa Cruz sound card.
From the front:
Close up of Peltier Power Supply kicking out the juice!
Overall pic
Close up of my homemade inline water temp sensor using a Tee fitting, the temp probe that came with the board, some closed cell foam, and some RTV silicone to seal it off.
Interior pic showing Res, Rad, and Everything Else!
Screen shot of Hardware Doctor notice my CPU temp!
Well I finally got my TH7II setup with water and peltier cooling.
It is incredible to watch those temps drop so dramatically when I power that thing up!
I have a P4 1.8A Northwood @ 2.4Ghz at 1.675v I think the CPU would do 2.4 at stock voltage but the memory needs more.
Plus, I have 512Mb Samsung with ECC, they are the 256Mb sticks which are not as easy to get to 533Mhz as the 128Mb sticks are.
You are also seeing a Visiontek GF3 ti500, 3Com Nic, and TurtleBeach Santa Cruz sound card.
From the front:
Close up of Peltier Power Supply kicking out the juice!
Overall pic
Close up of my homemade inline water temp sensor using a Tee fitting, the temp probe that came with the board, some closed cell foam, and some RTV silicone to seal it off.
Interior pic showing Res, Rad, and Everything Else!
Screen shot of Hardware Doctor notice my CPU temp!
Last edited: