- Joined
- Jun 23, 2009
- Location
- Washington
Anyone else having issues with CPUZ, Core temp etc not showing proper voltages? Am using a GB P67AUD5 MB with a 2600K chip. This chip is a screamer easily hitting 5.4+ on low volts. I am running 5.0 (50x100) 24/7 @ 4.15v with LL1 and PP enabled. When I boot into windows my voltage always reads 1.37v on core temp and 1.1v on CPUZ. The voltage never moves while running 8 threads of prime 95 but my temps are climbing to 68-75. I am running two dual 120 rad setups with deltas, 1000 lph pump, 3/4", and a HK3.0 block so my temps should never go that high unless my voltage is climbing but I never see any change in volts in my monitoring programs. Any idea how to get this unstuck? I have swapped BIOS, loaded the new version of CPUZ for sandy bridge and nada. Am I missing a BIOS setting that allows this to change? It makes it hard to keep working on a OC when you do not know where your voltages are. My V-Droop in BIOS is 1.378 when set to 1.415.