delta 38 temps

[vanibanez]

i currently have a delta 38 on a pep66 heatsink knockoff with a copper base. the idle temp is 43 degrees celsius, and tops out at 48 full load. I'm not sure if the duron 1200 is killing my temps or not,or the asus a7v266-e temp readings are off.the heatsink is cool to the touch. I have a combo 80 mm and 92 mm blowing in at the front and the same blowing out at the back. 76 cfm's blowing through the case! this is the lowest temp i can get, i am considering going for the thermalright sk-6 in a little while. any suggestions for the temp readings being this high would be appreciated, thx in advance..

[maxima88]

Did you use ASII or ASIII? that should knock off a few degrees.
It might be your hs too. My cpu temp won't go over 38c w/ prime95 on for a few hours. I have a 80mm sunon right above my hsf (mounted on the side cover)blowing air onto it. You might wanna try that too.
Your temps are decent anyway. You're not going to damage anything in your system w/ your present temps.