SOLVED Asus Rampage III Extr + G.Skill Enhanced

Having problems getting my 3x2GB g.skill kit to work with my board.

Motherboard: Asus Rampage III Extreme
RAM: G.Skill F3 -16000CL6T (3x2GB)

I've connected all 3 modules into my motherboard, but Windows only takes advantage of 4GB. I should have 6GB. I have swapped around with my modules, and have tested them with Memtest and Goldmemory. They're all ok.

When using speccy, i can see it says 6GB, but i get this info too.
Taken from speccy:
Total memory slots 6
Used memory slots 2
Free memory slots 4

I also see only 4GB in BIOS

Any idea what i can do to get them up and running as the 6GB set they are?

DRAM at 1.65V, bump VTT voltage too. That's really fast memory, it's not going to be easy for the IMC to run it, but it's possible with a bit more voltage.

Knufire said:

DRAM at 1.65V, bump VTT voltage too. That's really fast memory, it's not going to be easy for the IMC to run it, but it's possible with a bit more voltage.

Click to expand...

+1 I had to do the same on both of my X58 rigs.

Worked like a charm. Couldn't be done easier. Thanks a thousand