Sorry if this is kind of a dumb question, this is my first time building a computer.
Whenever i go into the bios and change my memory clock value or memory voltage from, it wont let me boot into windows and i have to reset my bios.
Here are my settings / setup
AMD 1055t OC to 3.8ghz
ASUS M4A785-M
Kingston hyperx 2GBx2 DDR2 1066
http://www.valueram.com/datasheets/KHX8500D2K2_4G.pdf
fsb 272
mult x14
NB freq - 2448
HT - x7
mem clock value = 200mhz
when i move my mem clock value to 266,333,400,533 it always lets me down. I really dont know too much about timing but i did try to set the ram to 5-5-5-15 and 1.8v to no avail.
How do i get my ram to be dram freq to at least 800 or 1066 (what it is rated for) Right now its sitting at 200mhz and its making me sad
Whenever i go into the bios and change my memory clock value or memory voltage from, it wont let me boot into windows and i have to reset my bios.
Here are my settings / setup
AMD 1055t OC to 3.8ghz
ASUS M4A785-M
Kingston hyperx 2GBx2 DDR2 1066
http://www.valueram.com/datasheets/KHX8500D2K2_4G.pdf
fsb 272
mult x14
NB freq - 2448
HT - x7
mem clock value = 200mhz
when i move my mem clock value to 266,333,400,533 it always lets me down. I really dont know too much about timing but i did try to set the ram to 5-5-5-15 and 1.8v to no avail.
How do i get my ram to be dram freq to at least 800 or 1066 (what it is rated for) Right now its sitting at 200mhz and its making me sad