Hi there! I just recently ordered all my computer parts and put it together. The problem is that once i boot up the system, there is no signal on the monitor. I'm probably thinking it is my RAM. Here is my build
Motherboard: MSI 990XA-GD55 AM3+ AMD 990X SATA 6Gb/s USB 3.0 ATX AMD Motherboard
Video Card: SAPPHIRE 100314-3L Radeon HD 6870 1GB 256-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card
RAM: G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1866 (PC3 14900) Desktop Memory Model F3-14900CL9D-8GBXL
PCU: AMD FX-4100 Zambezi 3.6GHz (3.8GHz Turbo) Socket AM3+ 95W Quad-Core Desktop Processor FD4100WMGUSBX
HDD: Seagate Barracuda 7200.12 ST3500413AS 500GB 7200 RPM 16MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
I'n thinking it's my RAM mainly because it says "Designed for the 2nd generation Intel Core Processor family and the Intel Z68 & P67 platforms"
Any help/suggestions would be great. Thanks!
Motherboard: MSI 990XA-GD55 AM3+ AMD 990X SATA 6Gb/s USB 3.0 ATX AMD Motherboard
Video Card: SAPPHIRE 100314-3L Radeon HD 6870 1GB 256-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card
RAM: G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1866 (PC3 14900) Desktop Memory Model F3-14900CL9D-8GBXL
PCU: AMD FX-4100 Zambezi 3.6GHz (3.8GHz Turbo) Socket AM3+ 95W Quad-Core Desktop Processor FD4100WMGUSBX
HDD: Seagate Barracuda 7200.12 ST3500413AS 500GB 7200 RPM 16MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
I'n thinking it's my RAM mainly because it says "Designed for the 2nd generation Intel Core Processor family and the Intel Z68 & P67 platforms"
Any help/suggestions would be great. Thanks!