• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

Low 3.3V rail on ST6 w/Celly 900

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

stymee

Member
Joined
Nov 18, 2001
Location
Troutman, NC
My gf's rig (see sig) is showing around 2.8V on the 3.3V rail. I'm running at 133MHz, load temps around 36°C. I get the same reading in the BIOS. Everything seems to be pretty stable.

I'm running a 300W Antec PSU (20A on the 3.3V rail), and the whole rig is only about 3 months old. The Vcore is right at 1.78V to 1.8V, 5V at 4.95V.

Anyone else have a similar problem with the ST6? I don't remember there being a jumper for the VIO. I'm only running 2 80mm case fans, a 50mm on the GPU and a 50mm on the NB, along with the Papst 33cfm on the CPU, but those sould only affect the +12V, right?

Just wondering, cuz my P3B-F runs around 3.58V with the VIO jumper set for 3.65V. I'd hate to think the Antec PSU is crap, I've heard great things about Antec PSU's.
 
Back