I have been looking at Kingmax Tiny BGA DDR 2700.
It says that it is CL 2.5 in the features. If I use it on a DDR 266 board will it tolerate CL 2 and/or a high FSB??
Here are the specs:
Kingmax TinyBGA DDR Long DIMM PC2700 memory. Low Profile 184-pin, CL2 DIMM based on Kingmax DDR-333 TinyBGA components.
WANTED: Avid High Performance-Hungry Users
The new DDR333/PC2700 TinyBGA SDRAM 256MB 184pin DIMM based on the advanced TinyBGA packaging technology and outstanding engineering expertise, it has outperformed its competitors by delivering lightning fast 333MHz speed and whopping 2.7 Gbyte-per-second maximum data transfer rate to avid high performance-hungry users. DDR333/PC2700 provide 30% more bandwith than DDR266/PC2100. DDR333/PC2700 performance match or better than RDRAM.
Features
Performance range - 166MHz (DDR 333)
CAS 2.5 (CL 2.5)
Double-data-rate architecture; two data transfers per clock cycle
Bi-directional data strobe (DQS)
Differential clock inputs (CK and /CK)
Single 2.5V +/-0.2v power supply
Programable read latency 2,2.5 (clock)
Programmable Burst length (2, 4, 8)
Programmable Burst type (Sequential & Interleave)
Serial presence detect with EEPROM
It says that it is CL 2.5 in the features. If I use it on a DDR 266 board will it tolerate CL 2 and/or a high FSB??
Here are the specs:
Kingmax TinyBGA DDR Long DIMM PC2700 memory. Low Profile 184-pin, CL2 DIMM based on Kingmax DDR-333 TinyBGA components.
WANTED: Avid High Performance-Hungry Users
The new DDR333/PC2700 TinyBGA SDRAM 256MB 184pin DIMM based on the advanced TinyBGA packaging technology and outstanding engineering expertise, it has outperformed its competitors by delivering lightning fast 333MHz speed and whopping 2.7 Gbyte-per-second maximum data transfer rate to avid high performance-hungry users. DDR333/PC2700 provide 30% more bandwith than DDR266/PC2100. DDR333/PC2700 performance match or better than RDRAM.
Features
Performance range - 166MHz (DDR 333)
CAS 2.5 (CL 2.5)
Double-data-rate architecture; two data transfers per clock cycle
Bi-directional data strobe (DQS)
Differential clock inputs (CK and /CK)
Single 2.5V +/-0.2v power supply
Programable read latency 2,2.5 (clock)
Programmable Burst length (2, 4, 8)
Programmable Burst type (Sequential & Interleave)
Serial presence detect with EEPROM
