slot 1 mobo bios

i have a lucky star 6ABX2 mobo here
slot 1 440bx

heres the link for the bios page:
http://www.lucky-star.com.tw/english/technical/bios/intel.htm#SLOT-1 M/B

my board does however not have DIP switches like the page says,its actually a jumperless design...

what bios should i download and flash to?


edit:
http://www.sharkyextreme.com/hardware/luckystar_bx/

this is my board and it says its jumperless with a 2Mb bios...

Can you post and get into setup?

If you get that far then 4.5X multiplier 66MHz fsb.

Then try 4.5X multiplier 75MHz fsb.

Then go for 100MHz fsb.

the bios works fine
but it only has 66,75 and 83mhz adjustments for the fsb

thats all i want from the newer bios

If I understand this correctly, you have a 66 MHz FSB CPU that has a good chance of doing FSB 100 if only the BIOS would let you?

What I've seen a few times (the MSI 6120 is like that for example) is that the BIOS will only let you select speeds of 100 FSB and up if it detects a CPU of 100 MHz FSB, so it might well be the new BIOS will not help.

I think it's a good idea to check out the classic pin B21 mod (you put a little bit of tape on the contact as insulation) to trick the mobo you have a 100 MHz FSB CPU.