-
Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!
TwinMos PC2700, how much voltage can they handle?
- Thread starter Wega!
- Start date
- Joined
- Mar 13, 2001
- Location
- Connecticut
Depends what chips on on it.
If it's hynix alot of people have used 3.2v on it with air cooling.
The memory is not likley to fail from using higher votages immediatly.
Some people have noticed with hynix if your memory will run say 180 with 2.8v then you run it at 3.2v for month then try to run it again at 180 with 2.8v it will no longer work but will require a higher voltage.
If it's hynix alot of people have used 3.2v on it with air cooling.
The memory is not likley to fail from using higher votages immediatly.
Some people have noticed with hynix if your memory will run say 180 with 2.8v then you run it at 3.2v for month then try to run it again at 180 with 2.8v it will no longer work but will require a higher voltage.
- Joined
- Mar 13, 2001
- Location
- Connecticut
You should be ok but there is always a risk if if it is small as with anything when you run it beyond specifications.
Similar threads
