P4T533-C No color red displayed on screen

Have PIV 2.0A O/C to 2.667G - Seems to run ok (Ran Prime95 for over 24 hours without a problem.)
P4T533-c
Samsung 40ns mem 512M
Coolermaster IHC-H71 Lapped with Artic Silver 3
Antec Performance PLUS Model PLUS880- with Antec Original TRUE P4 Power Supply 430Watt
Lite-On 40x12x48 CDRW
Maxtor 30G hard drive
Hercules TNT2 Ultra Video Card (Have PNY Geforce4 4400)

Everything works well but there is NO red being displayed by the monitor (CTX PRV1400F).

Have tried running at 2.0G doesn't seem to make a difference.

Have tried both the Hercules and PNY video card - same problem.
Figure that there must be a problem with the motherboard(?)

You didn't bend a pin in the monitor cable did you? Maybe a bad cable, settings on the monitor way off or something? I'd check the monitor on another PC if you don't, I seriously doubt it's a problem with the PC your using, specially since you tried 2 different video card with it.

Big Thanks to you mjones73 it works now - it was the cable.

Now if I could get the CPU alarm to shut up everything would be great.

Big Thanks to you mjones73 it works now - it was the cable.

Now if I could get the CPU alarm to shut up everything would be great.

Glad I could help, also, been there, done that