- Joined
- Jan 19, 2002
- Location
- north east
ok I finally got this thing up and running. See my other thread too. Just to refresh
System:
P4 2.0a
Asus P4T533-c
512 megs PC 800 samsung 40 ns rated mem.
Qpower cooling case and waterblock (my first attempt at water cooling)
Geforce 4 4600 chaintech at 320 core and 704 mem (too high?)
WD 40 gig 7800 drive
Asus rewritter.
CPU INFO:
prod code BX80532PC2000DSL5ZT
MM# 840355
batch L152B088
pack date is 02-25-02
version A78328-003
Ok My other thread is here:
http://forum.oc-forums.com/vb/showthread.php?s=&threadid=90137
Here are the benchmarks Sandra 2002
120/30 Ram 4x or 2399MHZ
4609 MIPS
1255/2928 MFLOPS
INTEGER 9526
FLOATING POINT 11629
MEM 3027 MB/S
3019 MB/S
122/41Ram 4x or 2440MHZ
4674MIPS
1277/2980MFLOPS
INTEGER 9692
FLOATING POINT 11809
MEM 3071MB/S
3063MB/S
125/42 Ram 4x or 2500MHZ
4802MIPS
1308/3080MFLOPS
INTEGER 9936
FLOATING POINT 12110
MEM 3149 MB/S
3144MB/S
130/43 Ram 3x or 2600MHZ
4952MIPS
1360/3174MFLOPS
INTEGER 10330
FLOATING POINT 12588
MEM 2733MB/S
2731MB/S
133/33 Ram 3x or 2672MHZ
5199MIPS
1398/3261MFLOPS
INTEGER 10620
FLOATING POINT 12941
MEM 2805MB/S
2810MB/S
I can get the ram to 4x but it is not very stable.
UPDATE - I did the voltage wire wrap and set it to 1.85. my mobo says 1.95-97 but it must exagerate some. I am stable at 2760, but my ram needs replaced. I will wait till i can trade it up for some "real" 1066. I can't believe my first real mod.
136 BUS BOOTS TO 2720 stable NOW woot. I can use this bus but the ram stinks.
138 BUS NOT STABLE AT ALL. crashes into windows.
NOTE - UPDATE - I lowered the voltage a tad bit and NOW it is stable here as well. Gets kinda hot. 49C under full load with water cooling
140 bus crashes after post. only good if cpu is cold.
With my watercooling how high can i overvolt that chip typically? I wonder. 1.85?
Thanks for all of your help setting this bad boy up. It has been lots of fun. I am addicted my wife says. hehe. I finally got the wire trick to work. i am pumped. first "real" mod.
Help out if u can. TU. Post your responses or comments/suggestions. TU I have to run some benchmarks at 2760 with the new 1066 memory when i get it.
Dave
System:
P4 2.0a
Asus P4T533-c
512 megs PC 800 samsung 40 ns rated mem.
Qpower cooling case and waterblock (my first attempt at water cooling)
Geforce 4 4600 chaintech at 320 core and 704 mem (too high?)
WD 40 gig 7800 drive
Asus rewritter.
CPU INFO:
prod code BX80532PC2000DSL5ZT
MM# 840355
batch L152B088
pack date is 02-25-02
version A78328-003
Ok My other thread is here:
http://forum.oc-forums.com/vb/showthread.php?s=&threadid=90137
Here are the benchmarks Sandra 2002
120/30 Ram 4x or 2399MHZ
4609 MIPS
1255/2928 MFLOPS
INTEGER 9526
FLOATING POINT 11629
MEM 3027 MB/S
3019 MB/S
122/41Ram 4x or 2440MHZ
4674MIPS
1277/2980MFLOPS
INTEGER 9692
FLOATING POINT 11809
MEM 3071MB/S
3063MB/S
125/42 Ram 4x or 2500MHZ
4802MIPS
1308/3080MFLOPS
INTEGER 9936
FLOATING POINT 12110
MEM 3149 MB/S
3144MB/S
130/43 Ram 3x or 2600MHZ
4952MIPS
1360/3174MFLOPS
INTEGER 10330
FLOATING POINT 12588
MEM 2733MB/S
2731MB/S
133/33 Ram 3x or 2672MHZ
5199MIPS
1398/3261MFLOPS
INTEGER 10620
FLOATING POINT 12941
MEM 2805MB/S
2810MB/S
I can get the ram to 4x but it is not very stable.
UPDATE - I did the voltage wire wrap and set it to 1.85. my mobo says 1.95-97 but it must exagerate some. I am stable at 2760, but my ram needs replaced. I will wait till i can trade it up for some "real" 1066. I can't believe my first real mod.
136 BUS BOOTS TO 2720 stable NOW woot. I can use this bus but the ram stinks.
138 BUS NOT STABLE AT ALL. crashes into windows.
NOTE - UPDATE - I lowered the voltage a tad bit and NOW it is stable here as well. Gets kinda hot. 49C under full load with water cooling
140 bus crashes after post. only good if cpu is cold.
With my watercooling how high can i overvolt that chip typically? I wonder. 1.85?
Thanks for all of your help setting this bad boy up. It has been lots of fun. I am addicted my wife says. hehe. I finally got the wire trick to work. i am pumped. first "real" mod.
Help out if u can. TU. Post your responses or comments/suggestions. TU I have to run some benchmarks at 2760 with the new 1066 memory when i get it.
Dave
Last edited:
