View Full Version : Need seti times with Duron chips please. :)
Hey, subject says it all. I am still trying to figure out a system that will be quiet and have good seti times. Anyone run seti on a Duron chip at the stock setting?? Any help would be appreciated!! :D Thanks!
My dual durons at work are stock, 1.1s. I get about 4:45 to 6hrs from them. This is a workstation that is used for various tasks all day.
An unlocked 1GHz Duron running at fsb 133 to 150MHz should give you a wu in 5 to 6 hours. Just guessing that 100fsb will be in the 6 to 7 hour range.
Both are with DDR memory.
edit: Unlocking all Durons can be done with a pencil.
They do around high 4 hours to high 5 hours at stock. They may do 4hrs flat when overclocked.
Edit: This is on a Morgan 1gigish.
My Morgan 1gig @ 1300, 172fsb crunched in high 3 hours average, and sometimes as low as 3.5 hours.
06-07-02, 11:45 PM
below 1ghz chips will do a unit in about 8-6 hours (depending on FSB and what ram)
my duron 1.2 at stock did 5 hour wu's on DDR
at 1.32 it does 4-4.5 hours on DDR
Morgan email@example.com FSB 162 fastest ram timings:
vBulletin® v3.8.7, Copyright ©2000-2013, vBulletin Solutions, Inc.