my water cooling

[adamtekh]

here she be , this is my first amtemept for h20

[adamtekh]

another

[adamtekh]

yup i been drinking again

[adamtekh]

what if u hit me

[JudgeDredd]

Sweet rig man... but you carried all that to a LAN party?

[The Spyder]

Self made block? Nice job- better to have it all in one if it can be!
Spyder

[adamtekh]

yes its all home made cept the heater core its from a 1990 f150 v6 model

and the res is just tuper ware

zip ties, duct tape, epoxy, silcon, plumpers goop

[adamtekh]

and thats not a lan i took to my high school

thats one of the comp labs

it has 28 1000mhz pIII dells

[Yodums]

Looks good, although I'd have the res on the floor, cut down on some tubing.

[JFettig]

lol thats not even your computer?

how did you mount that thing on there?

[adamtekh]

no thats my computer (the super7 200mmx in my sig )

its glued on , if u asking about the block

[JFettig]

lol what did you use? epoxy? hahaha thats kinda funny..

[adamtekh]

plumpers goop. actualy i used it alot on this project

works very well

takes a while to cure

[Diggrr]

Hey, whatever works, buddy!

That's a nice "chilly" looking setup with that big F150 heatercore...you get a better overclock with all that cooling power?

[JFettig]

yea, and what about temps??? and are those 120mm fans on that huge thing?!?!

[adamtekh]

4x 92 mm fans

and it did 266 on air

i havent had teim to fidel with it to see the true highest oc

and no clue what temps r right now , ill be geting a temp thingy soon

[adamtekh]

if u guys want me to take some more pictures just explain how to take them as in what do u want a picture of , blah blah

u know what i mean

[JFettig]

this isnt on your tbird???

[packratbob]

yah i was reading the same thing lol... wat the heck water cooling on an mmx200?? woah i didnt even think those thinks need much cooling. they probably putout as much heat as the new mobo chipsets lol.

Adam tech, just one question?? why not on the t-bird?? it need it more then the other one lol

[JFettig]

im guessing its a testrun..... to make sure the thing works...?

[adamtekh]

this is a test run exactly

soon i will have a job so i can buy better parts for my beloved
t-bird

[JFettig]

your gonna buy the parts? or make the parts? its so much funner to make the parts! i bet you had a blast makin that waterblock? i know i love makin my stuff!!!

[adamtekh]

well ill buy a inline pump the one that starts with an E

and a heator core , and ill be pelting this 200 mmx just for fun

weeeeeeeeeeeeeeeeeeeeee

[adamtekh]

but about about makeing the block i might make a alum pop can one , or just buy the gemini

[JFettig]

yea you have 2 very good choices there!(especially being the inventer of the popcanblock) lol

[The Spyder]

Popcan already been done.... look on the front page :-D
Spyder

[adamtekh]

i know its on the front page and i knew that maskedgeek invented it

and i know it would be no sweat to make

and the dif between an alu one an CU is .1 c/w

[JFettig]

yes very easy to make, and the cw diff is .01 not .1 a huge diff in that...

i suggest goop it all together, and not use epoxy.... goop sould hold better...

[adamtekh]

yes this goop stuff is great

[JDXNC]

I've got my 200MMX running at 300 Mhz also, but its still with air cooling, its in a similar case... I don't even know who it's made by.

Check it out HERE (http://forum.oc-forums.com/vb/showthread.php?s=&threadid=74803&pagenumber=2)

This CPU ran fine @ 266 with its stock HSF but with the HSF off my old K6-2 550 it runs stable @ 30*C full load.

Check the HSF on it!

[The Overclocker]

Originally posted by JDXNC
I've got my 200MMX running at 300 Mhz also, but its still with air cooling, its in a similar case... I don't even know who it's made by.

Check it out HERE (http://forum.oc-forums.com/vb/showthread.php?s=&threadid=74803&pagenumber=2)

This CPU ran fine @ 266 with its stock HSF but with the HSF off my old K6-2 550 it runs stable @ 30*C full load.

Check the HSF on it!

i had the same heatsink, it is now ramsinks on a friends graphics card!



adamtekh: will you be making a waterblock like that one for you tbird? what is your current waterblock made from?

[adamtekh]

its made from and alum heatsink , i had the begining s of the batery afect since its alum and heat core has copper

now i just killed my 900 t-bird but fear not ill be geting my freinds 1.33 since hes getting an 1800+

i had water working then i had to remont the water block and i did it wrong , and it freid ( didnt crack core, it had a melt down )

here is a pic of 3 dead cpus , key chains any one ?
my cpu was the one on the left

[adamtekh]

oh yes going to water did help i hit 1151 completly stable and i hadnet fully tested the limits but it wouldnt boot @ 1200

and i have killed my temp sensor also, it now reads in negatives.

[JFettig]

that sucks man, ill take the dead cpus tho! id love to make me some keychains and wall decorations....

[packratbob]

Originally posted by adamtekh
its made from and alum heatsink , i had the begining s of the batery afect since its alum and heat core has copper

now i just killed my 900 t-bird but fear not ill be geting my freinds 1.33 since hes getting an 1800+

i had water working then i had to remont the water block and i did it wrong , and it freid ( didnt crack core, it had a melt down )

here is a pic of 3 dead cpus , key chains any one ?
my cpu was the one on the left

awe so sad!!!! they all dead :( u know if they still sell them u can probably rma them i rma 3 durons and got them all back provided u clean them up properly so they cant tell u did anything to them.
it can be done and those looks like t-birds and duron.

i rma a 1.2 t-bird and getting it back sometime next week yi ha!!!

[DKYoda]

Im thinkin a kewlsville necklace ... with a thick silver chain :D
The sign of a true overclockin' geek !!! :cool:

[adamtekh]

that was 2x ARGA 900 t-birds ( 1 mine ) and a green core duron

i decided to play socor with mine and it cracked in half , i sold the other t-bird for 1$ and i still got the 800 duron

its just got some chips on the core from my bro inlaw trying to put on heatsinks

i allready made a key chain out of an old cryix 150+ gp so ill make the duron into something

[JFettig]

*inbox emptied*

[adamtekh]

juts got back from a LAN , its kinda funny really

my freinds bios suports an XP cpu but his board is pcb ver 1

it needs to be 1.1 to work with an xp

so we flashed my bios and put in the 1800 + weeeeeee

so ill be trading mobo and cpus with him shortly

im just happy that i have a working computer that i can do things on