overclocking with Live! and G3Ti200.

[o770]

i thought on ask about the high pci/agp bus you get the live! 5.1 and the geforce3 ti200 running ok, and then how good it would be to have some kind of database of this. it could be a reasonable help on the overclockers page and forums as well as the cpu database either is. anyway, for now i appreciate any help about the two devices. please just post the frequencies/highest bus and card model.
thanks!

[o770]

BuMp!!
im sure ppl got the same cards. please post the highest bus you get the cards running ok.
thanks!

[Mpegger]

I dont think I'm the highest, but...

SB Live! Platinum (original, not 5.1)

PNY GF3 (original, not Ti)

Abit BE6 Board. 133MHz FSB speed with a 1/3 PCI bus divider = 44.3MHz PCI bus speed. AGP Bus divider at 2/3 = 88.6MHz AGP bus speed. Ran like that for months rock solid, till I realized I had a 1/4 setting for 133fsb.:p

But the the only AGP dividers I have with my board are 1/1 and 2/3. If I can get my Cele up to 140, that would put the AGP bus at 93.3MHz!:eek:

I hope this GF3 can take the speed. As it is, the h/s on the gpu gets hot enough without additional cooling that I cant keep my finger on it for more then a couple of seconds. I really need a temp probe on it.

[o770]

ok thanks Mpegger.
thats higher than i thought it could handle.
anyone else?