---Mushkin pc3000 = AWESOME---

Starfoxer · Jun 19, 2002

i tried to max out my ram yesterday as the forums were
down all day and i was pretty bored.

it was running a bit unstable at 200mhz but it is now
perfectly stable at 195!

this stuff is awesome and i reccomend it to anyone.

turbo timings with cas 2 and all, @ 3.0 vdimm.
is it safe to run the vdimm this high? i may be able
to push it farther with some more volts.

Starfoxer · Jun 19, 2002

here is my sandra bench, wish it were a bit higher.

and i wish i could push my AGOIA a bit higher.

Penguin4x4 · Jun 19, 2002

Try CAS 2-3-3. I know that the Mushkin PC2100 will go to PC3200@CAS 2-3-3 1T with 2.5v. The EpoX board you got will OC like a mother,

!

BTW, get that cat out of here. Frigging thing scared tha s*** outta me, man
________
330

Gosu · Jun 19, 2002

starfox
what bios you use?

Placid · Jun 19, 2002

Pretty sure the limit of the memory is no where being reached as it is rated 3000mb/s and you are only pushing 2700's.

Penguin4x4 · Jun 19, 2002

Award PnP Flashable, Gosu
________
Oregon dispensaries

Starfoxer · Jun 19, 2002

LOL i was hoping my cat would scare someone some day!

i'm using the 2321 bios i think. the stock bios wouldn't even let
me boot into windows with the mushkin pc3000 on all stock settings. i had to totally reinstall windows after a format and then buy a new floppy drive to flash to the new bios.

but luckily i have a crucial back-up stick

placid, i tried 200 at turbo and it wasnt too stable. should i
try relaxing the timings and upping the FSB?

Penguin4x4 · Jun 19, 2002

CAS 2-3-3 oughta work. Try it. Now. RIGHT NOW!!

BTW, the reason that cat scared me was because I was reading your post(Using a v.92), and suddenly it just appeared. Damn near had a heart attack

________
Free xxx movies

Placid · Jun 19, 2002

Yes try slower timings. The 8K3A does have a 1/5 pci divider but no agp divider past 1/2 so it is possible your video card will become a problem but you should see video pixelation if it is.

I would try these settings then if they are stable try setting each to the faster setting until you find one that causes instability.

Motherboard make and model: Epox EP-8K3A and/or Asus P4S333
DRAM Clock: 200 MHz
RAS Precharge: 3
RAS-to-CAS Delay: 3
CAS Latency: 2.5
Command Rate: 2T
Memory Voltage: motherboard default

maxima88 · Jun 19, 2002

Starfox, Great O/C!!!

Have the same memory and very good air cooling and that just makes me hate my mobo

even more. no multi or voltage options, fsb options are very limited.
worst o/c mobo in the world.:

Starfoxer · Jun 19, 2002

yea maxima! the 8k3a is awesome! i had an ak31 that wasn't
too bad.

okay, im at 210 FSB at normal settings placid, the only thing
that scared me was that the bios was all wack and had
weird lines going up and down it.

"" "" "" "" "" "" kinda like that but i could read it and all. my
"" "" "" "" "" "" Vdimm is at 3.1 right now. so just try
"" "" "" "" "" "" upping the timings until it goes total wack
"" "" "" "" "" "" on me?

Starfoxer · Jun 19, 2002

right now im on cas 2 -3 -3 2CMD

now im gonna try turbo settings hehe

Penguin4x4 · Jun 19, 2002

PUSH IT BABY, YEAH! :beer:

Video Card Work? Try to get it(Processor) to go to 2,455MHz; 2200/1800 = 3000/2,455
________
VAPOR LOUNGE

Starfoxer · Jun 19, 2002

it started funkin out on me, random reboots and suck.

i'm at turbo timings @ 200fsb. the same i was at before.

but WTF?

my sandra scores are lower than
my 195 FSB at same timings. i guess i'll just keep it how i had
it. damn i wanted 3mbs!

Placid · Jun 19, 2002

Yes that video problem shows up in the bios first.
Some say it's the video card not liking the agp bus speed some say it's a problem with the KT333 chipset.
215 is good

215/5=43 pci and 107.5 agp.

Do you get close to or over 3000mb/s yet?

Starfoxer · Jun 19, 2002

nope, all scores were lower than my 195 fsb.
that's why im confused. oh well, back to 195 for me

Penguin4x4 · Jun 19, 2002

If it doesn't work out Starfox, you can always try the Mushkin 2100.(200@CAS 2-3-3 1T= 3073)Look Here
________
Sexy girls

Placid · Jun 19, 2002

Yes Penguin4x4 the abit board has better memory bandwith thatn the epox.

Starfox,
Now that you know your hard drive(s) are ok at a pci bus of 43 try setting your fsb to 43x4 or 172 and set the pci divider to 1/4 and use the fastest memory timings and see what your mem score is.

Silversinksam · Jun 19, 2002

I told you Mushkin is good stuff

Ps Mushkin doesnt like to much voltage

Starfoxer · Jun 19, 2002

i did wut you said but just makes my PCI high and MEM low.

SSS, what voltage you run at, i figured that out when it
wouldn't boot at 3.2

---Mushkin pc3000 = AWESOME---

World's Biggest E-Thug

World's Biggest E-Thug

Are you my Daddy?

Member

Senior Member

Are you my Daddy?

World's Biggest E-Thug

Are you my Daddy?

Senior Member

Member

World's Biggest E-Thug

World's Biggest E-Thug

Are you my Daddy?

World's Biggest E-Thug

Senior Member

World's Biggest E-Thug

Are you my Daddy?

Senior Member

Moderator/ Silver Paste Taster©

World's Biggest E-Thug

Similar threads