tell me yr temperature

[dansonang]

just give me a short reply on wat is
yr processor speed, yr room temp, yr cpu temp and yr mobo temp

if possible add the number and type of fans u have in yr com.

Helpme for i need this survey to mod my com.

:) danson

[dansonang]

to be more specific

yr respective temps when u r surfing the net and yr respective temps when u r playing games

thank u

:) danson

[packratbob]

Room-23 CPU-33 mobo-26 when folding thats 100% usage
Room-23 CPU-29 mobo-26 when not folding(idle)
i have four 80 mms on my rad. oh ya it is water cooled if u didnt know alreadi rest of info is in my sig

[Lt. Max]

1.8A @ 2.4
room 26 cpu 38.5 mobo 27 full load (folding)
room 25 c pu 31 mobo 26 (idle.)

i have 25 cfm front intake 50 cfm side intake
32 cfm plus enermax whisper 350w out rear
ax478 wit 50cfm on heatsink.

[Silversinksam]

Originally posted by Lt. Max
1.8A @ 2.4
room 26 cpu 38.5 mobo 27 full load (folding)
room 25 c pu 31 mobo 26 (idle.)



Interesting... my temps are almost identicle to yours (as are my system specs 1.8a@ 2.4

Only difference is my room temp is 24 and my CPU idle is 33(load is 38)

[dansonang]

My room is 29 degrees

mobo is 31degrees and cpu 40 degrees idle

Even when i surf net or listen to music heavily cpu temp only rises by 1 to 2 degrees. Strange

mobo still 31 degrees but cpu rose to 50 degrees when full load

I also use a 1.8a but not overclocked. I have 2 rear fans 2 front fans 2 side fans and a volcano 7+.

are my temp norm?

[packratbob]

i dont own a p4 but i heard they have a throttle down mech in the cpu so if temps get to high they will lower the mhz to keep the heat under control. maybe 50 will cause ur cpu to run a little less mhz but i'm not a p4 expert so go to the intel forums and ask they should know wat temps r recommended.

[Puer Aeternus]

Hey Dan, Go here
http://www.pickleloaf.com/exp/modules.php?op=modload&name=Downloads&file=index&req=viewdownload&cid=2
and download F@home. this is waht many of us use to get a temp at full load. It is also for a good cause. When I list my load temp is w/ Folding@Home running. You can also use prime95 and SETI(I reccomend F@Home. We are in 3rd place and trying hard to keep ahead of Team 64(rage)...we could use your P4 muscle!!!)
Make sure when you sign on that you chose Team # 32.
Post back w/ your temps if you decide to try this. I bet you will get a accurate and consistant load temp w/ F@Home running.

[Carnil]

Athlon XP2000+ overclocked to 1750MHz
Idle: Room: 23 CPU: 57? Mobo: 29
Load: Room: 23 CPU: 61 Mobo: 31

The reason I'm not sure about the idle CPU temp is I've never run the machine idle after overclocking it -- it's always been running either SETI@Home or the Distributed.net client.

Cooling: Two generic case fans (came with the Antec case), 1 PSU fan, retail Athlon heatsink.

[Starfoxer]

61C is a bit high. maybe you should back down that overclock :p

[Yodums]

46 Load w/ 32 Case Temps. Summer is here... My CPU temps are always 30-33 in the summer, and 24-26 in the winter, and the CPU Temps are always +14 Degrees above case temps.

[Gerst240]

amd xp 1800 1.53ghz
i will be unlocking it very soon!
after a few more case fans and maybe a new hsf
cpu=39
room=31
full load=44

[pby5cat]

cpu= 1.3 Tbird stock
(on web)room=25C, case=31C, cpu=50C

[MajinSSJVegetto]

PIII 500mhz
mobo, who knows, old system=)
Room temp 27-28*C
mobo temp 31*C
cpu at load 61*C

only running pathetic fan right now.
cpu use to run at 85*C before I added AS3.

[Nismo Nate]

P4 1.8a @ 2.25

Room: 24c

CPU Idle:28c (today while online Usally 31c But today it's cold )

Full Load: 38c (Si Soft Overnight)

Games: 34c

Two 80mm Panaflo Intake's with Home Depot Air Filter in front of them (I think the filter cuts down the Air Intake a litttle)

Two 80mm Panaflo Exaust fan's.

[dansonang]

thank for the great response.

hey peter and others wat is that folding@home for and how to use it?

I downloaded it and this black screen came out and asked me to sign in. then my team number? I type in team32 or what?

what is prime 95 and SETi too?

:) danson

[dansonang]

Peter I still failed in removing my volcano 7+. I have sent a complaint letter to the TT condemning that suckiy clip. But the cooling was great. haha!

:) danson

[Lt. Max]

folding at home is a cancer research thing. select a name you want and put team 32 then let it run ,it makes ur comp do 100% cpu usage and only uses free cylcees , u wont notice that its running except temp is a bit higher.

gl! hope to seeya on the team
folding.stanford.edu

[dansonang]

MajinSSJVegetto, u really had a dramatic dcrease in temperatures

[Lt. Max]

seti is kinda same as folding except it is scanning the sky .... and lookin for extraterrestria.
neway, folding is better , neener neener. so get that.
prime 95 is just a cpu burn in utility and wont help wit nething , not really need to bother wit it.

[dansonang]

thx Lt

:burn: danson

[Lt. Max]

yup always glad to help, check the folding forum for more details

[dansonang]

LT how to end using that folding @home

[dansonang]

LT when should I close that program.

When the string of words in the cpu ended mytemp hit 47 to 49 if I keep leaving it there my temp rose to a max of 52

[dxiw]

Athlon XP 2100+

1820 mhz @ 1.75 volts
room 26C
mobo 28C
cpu idle 47C load 51C

2002 mhz @ 2.10 volts
room 26C
mobo 28C
cpu idle 62C load 66C

When I get watercooling I should be able to run at 2ghz with no heat problems....

current cooling:
Thermalright AX-7 w/48.9cfm YS Tech
4 Sunon 40cfm case fans

[dansonang]

why izzit that my load temp rises so high above idle when other do not?

danson:(

[dansonang]

The temp after the programcease is 47 degrees.(100% usage) If I leave it there for some time temp rose and stays between 50 to 52. (still 100% usage)
hmm....my room is 28 today, quite cool and my mobo always at 31 no matter idle or load (strange)
my cpu always idle between 40 and 41, even when i surf net and do alot of crappy stuff, temp still stays there.( strange)
Only when I play games temp shoots to 50 to 52, my lowest was 47 (only once)

y izzit that my load rises so high above my idle when I see some of yrs do not?

:confused: danson

[Carnil]

Originally posted by Starfox
61C is a bit high. maybe you should back down that overclock :p

The funny thing about my CPU temps is that un-overclocked is only a degree or two lower. Also, the mobo in my computer uses the on-die temp sensor, so it'll read about 10-15 degrees higher than someone who's using a mobo with an on-board sensor.

[Lt. Max]

hey danzon sry i was away, u close it wit right click on it and quit. it starts up wit startup if u dont want that u can either uninstall in control panel addremove progs or if u wanna keep it but just not at startup then go start msconfig and then disable from there. ur temps arent that bad btw. what kind of cooling do you have?

[dansonang]

2 rear fans ( useful ) 8cm by 8cm

2 front fans ( quite useless as it does have the power to drive cool air far enough in to the system) 8cm by 8cm

2 side fans 10cm by 10cm(card cooler) which drive the most cool air thru my sysytem. ---> basically to cool my mobo, agp and pci

my mobo temp dropped by 5-6 degrees after using that. Video card temp i dun know how much it dropped as I dun have a sensor.

A volcano 7+ which I have yet to figure out how to remove even after Peter.A gave me soem tips....only if he could come my house and help me....:rolleyes: . I want to take it out to apply AS3 I got so fed up tht I sent a complaint letter requesting for help from TT.
...bUtstill no reply yet.

By the way, Peter can u show me some pics on how u remove it.

even when I am typing now my cpu temp is 40 degrees and mobo is 31 when room has risen by 1 degrees to 29.

that all.

:eek: danson

[Lt. Max]

mm kinda hard to help like that, do you have the cfm ratings of the fans?
how big are the front fans?
u have powersupply pullin out air as well i presume.
the side fans.. are they on side of case like normal fans?
just blowin air in.. ?
ok the volcano7+ do u have any paste under it? how did u attach it?

o yea, what computer u have? amd or intel? and what model?

[dansonang]

front fans are 8 cm by 8 cm . My front and rear fans come together with the casing so i do not know their cfm but fr the side fans I know. it is 80 cfm.

I am using

-asus p4b 266-c motherboard
-intel 1.8a (not overclocked)
.....but I intend to overclock it to 2.4ghz..soon
-kingston 256mb DDRram

I got a real thin layer of thermal grease nder it. I wanted to reapply it with AS3 but that damn sucky clip is so stiff that I couldn't move it off that 478-socket.
as for how I attach it. I just sit that volcano one the socket and begin pushing those clips into the 478.

anyways I love leaving both the sides of my case open. It looks real sxy that way so I dun really care about exhaust fans removing build up of hot air. for open cases. Buildup of hot air can be removed faster.


:p danson

[CrystalMethod]

Room: 26.2°C
Motherboard: 29°C
CPU: 31°C

Celeron 900@1200 ~1.75 Vcore
Asus TUV4X
Alpha PAL 6035 with Delta 38
Aopen HT-08 with Enermax 300W PSU
5 X 80mm case fans (3 intake, 2 exaust)

[dansonang]

crystal method, yr cpu only 2 degrees higher than yr mobo. real impressive....Is that really the temp from the core of yr cpu?

:eek: danson

[res0r9lm]

xp1800+@1754 vcore 2.02, room 23c, case 30c, cpu 36c, using a swiftech mcxc370 w duct and delta 80mm cpu at full load by means of folding@home.

[Lt. Max]

alright. dan
what case do you have? antec?
then the fans are about 30-35cfm, plus psu about 30 cfm so u have about 150 cfm wit that. so like 220 cfm comin in and just 90 going out..
o but when ur case is open i guess it doesnt really matter, just aim all the fans to blow towards cpu fan (not the rear ones i think) but one of the 10cm ones at least.

i would try flipping the front fans to pull air out.

the 2 80cfm fans they are both pushing air in and are they near each other? or in seperate places?

mm, i attached the ax478 wit clips too on my bros comp he has same comp and he gets 38.5 when folding.. and oc @ 2.4ghz..

oh, one thing that could help a lot, do you have a table fan? if you leave side of case open u can put that to blow toward it or right into it even if u dont care about the view.. dropped my friends xp2100 from 60 idle to 53 idle. :D damn amds so hot.

the clip, i think it has this one end, just like try to pull it up, like a switch kinda thing.. hard to explain, look at it its not that hard i think.

[dansonang]

nah. I dun have an antec. But mine is a cool looking case with badly positioned and some crap, brandless front fans. Those fans are blocked by the internal structures in the case.

what do u mean by flip the front case fans?

yeah it is hard. So stiff that it doen't move when I push it to get it out. I wonder If I could pluck out the socket tohether wif the HSF?
Anyone tried it ? This is an much easier method.

:cool: danson

[Lt. Max]

hey theres a 3d model of putting the volc 7+ together on their website..


http://www.thermaltake.com/products/heatsink/v7plus.htm
click 3dview then install thing and u can choose like socket 478 then assemble

[Lt. Max]

oh please dont do that !!!
then u will ruin the mobo if u pull it out wit socket.

[SeigeAkicksass]

how many ppl in here think summmer temps suck! i do it is annoying it gets all hot then it gets all hotter with the computer on:rolleyes: :confused: eh oh well



wiht the seti and folding thingy's do you have to be online for them to work or what?:eh?: :D :eh?: :D

[dansonang]

I know how to assemble the put the thing to the socket but I dun know how to remove it. hahah

:burn: danson

[Lt. Max]

try 3dview thing if that helps, the clips should come off easy, just on one side theres this clip area thing that goes farteher out pull that up it shoudl come loose

[dansonang]

I didi the folding when I am online chatting thru the forums wif Lt.

anyway my country is like summer all the day throughout the year. I am used to it. my temps are only alittle lower than yrs just that I dun overclock.

:p danson

[Lt. Max]

mm, temps lower then mine?
u said u had like 40 idle. ? and when u put fold it went 52.. ?
my (bros) 1.8@2.4 folding does 38.5 c.. room temp 26.

now u confused me.. :S

[dansonang]

Lt i saw the 3d stuff. It does not help. those 4 metal things extending out fro0m the sides are the clips that hold the volcano to the socket. It is so stiff that I many fruitless attempts to get that thing out

:D danson

[dansonang]

sorry thats for seigeakiackass.

haha. But the one on 3dview is for U

[Lt. Max]

ah.. hmmmm.. ok ill try to make a drawing. . .


really hope this helps ..

fook its bigger then 600x600 :|
what do i do!

[Lt. Max]

k

[dansonang]

I see it. that thing cannot be pulled up bcos there is a small protruding metal below it hat is stuck in a groove.

nevertheless I will try. how u insert that image?


:p danson

[dansonang]

not a drawing using freehand. resemble the volcano especially the clips

[Lt. Max]

i made it quicky in paint wit hte line tool and txt then when u post under theres attach file and do that.. 600x600 pixel max tho :D

[Luie]

AXP 1600+ @ 10.5*140 w/ 1.65Vcore! (yep, 1.65Vcore)
CPU 100% loaded Folding for serval days: 53C
CPU temp. just starts: 48C
Mobo: 32C


60x60mm 4500rpm 30dB fan blowing on lapped aluminum hs.
30dB fan sucking air out from the case in the PSU.


yep, only 2x 30db fans but to me it's freaken noisy.

[packratbob]

Originally posted by dansonang
not a drawing using freehand. resemble the volcano especially the clips

can u undo the screw holding that clip down that might help.

[dansonang]

everybody i have succesffully removed the TT volcano 7+ today. WOOhoo!!! And i applied the AS3.

[dansonang]

keep the temperatures coming in.

now after applying AS3 my cpu idle is 40degrees and 49 degrees load. load dropped by 3 dgrees.

My room temp is 29 degrees

:o danson

[Luie]

Nice!:)

[dansonang]

luie since u r in this thread tell us yr temps.

:burn: danson

[Luie]

I've posted it already, it's 4 posts before my last post.


Here:
AXP 1600+ @ 10.5*140 w/ 1.65Vcore! (yep, 1.65Vcore)
CPU 100% loaded Folding for serval days: 53C
CPU temp. just starts: 48C
Mobo: 32C


60x60mm 4500rpm 30dB fan blowing on lapped aluminum hs.
30dB fan sucking air out from the case in the PSU.


yep, only 2x 30db fans but to me it's freaken noisy.

[arhines]

Thermalright ax-7's with vantec stealth fans (21db, 27cfm), one on each of my dual duron 1.3's, on an asus a7m266-d (mpx chipset). Cpu temps: cpu0: 42 cpu1: 40.
With better fans, I would expect somewhere in the thirties.
chipset is at 30 degrees, cooled actively with a 40mm fan on extruded fin heatsink.

[aftermath]

when at home in my big room my case is 20*c room 19*c
at colage case is 22*c
cpu is 27*c at home but nearer 30*C at colage dont know my idel temp cos im allways runing seti.

(gets higher, 32*c with prime 95 torture)

i know it says 28*c below thas what it was when i made that list

[DManeKid]

if you are worried about slipping because of using a screwdriver then use a socket driver...i think that is what it is called... it looks like a screw driver but it is square so ou can attach a small socket to it. i suggest that every1 uses this to take off and put on hs's so that you never slip (happens VERY rarely) the reason it never slips is because it is round so you can go around the slip of metaland have much more control.

[illbreakit]

right now, room temp 27* via a rayteck temp gun. case 20,cpu 46 @ full load(folding in progress), via MBM5 . BTW comp is on the floor, in the shade, thats why case is lower than ambient. Just checked HSF with rayteck and it reads 43* MBM5 is reading good cause the gun can't read core, only HS temp.