All of us that WaterCool Go here.

[Dissolved]

List Your Water cooling Parts, and your Main pc Parts. Id like to take a lil thread to see what we all got. Temps would be good to list too.

[adamtekh]

some 120 GPH little giant submersible pump , 1990 f-150 heater core , home made block

it was my first atempt @ WC

i had it on my t-bird for a while and it gave me a better OC

no temps cuase i broke temp sensor

http://forum.oc-forums.com/vb/showthread.php?s=&threadid=95279&highlight=my+water+cooling

[Neco]

AMD Athlon XP 1500+ (1.33ghz)
Shuttle AK31A Rev 3.1 Mobo
512MB DDR-SDRAM, PC-2100 (2x256)
Seagate Barracuda IV - 80gb, 72k RPM, ATA100.
SB Audigy (OEM, no gold plating :mad: )
Logitech Z-540 (4.1 surround)
Envision 780e (monitor)
3com Etherlink III (I think lol) 10mbps NIC + motorolla surfboard cable modem
Lite-On 16x DVD & 16x10x40 CD-RW
Radeon 8500 - OEM
"Super Duper Slot Fan" ( :rolleyes: )
Case sucks.. some Generic tower. no room for fans whatsoever w/ 300W PSU

--------

1 Gallon modded paint can Res + Rio 180 (120gph) Mag Drive submersible
Standard clear tubing
Generic Copper Water Block - POS
12"x 5" Aluminum Radiator - POS + a really suck-ass cardboard shroud
Generic Radioshack fan. claims 85 CFM @ 12v (running at 7v)4.xx " or something

Temp - I wish. low to mid 40's or worse.

-----

Someone send me a winning loterry ticket plz :confused:

[cynergy]

via aqua 1300 pump, 4" bong w/ 90mm fan, gemini wb..

temps -

ambient: 23
water: 21
cpu idle: 33
cpu load: 36
system: 28-33

[|PuNiSh3R|]

I don't have a system now.. :(

Hopefully my phase change setup will be done soon.

[illbreakit]

in the midst of gathering parts for mine. Right now I have a home(at work) built copper base/allum block cpu cooler, allum chipset cooler, allum heater core from 88 cavalier w/ plexi shroud. Getting a Hagen 801 pump 400gph

[JFettig]

almost just fried my epox 8k3a, AGOIA 1600+ goldensample gf2 dual display tv(not watercooled yet)

got my homemade block http://forum.oc-forums.com/vb/showthread.php?threadid=93196&goto=newpost
89camaro heatercore with aluminum push pull shrouds 80cfm sanyodenki fans,
maxijet 1200

rite now stock got 24c water and 34c cpu(on die)

-edit- im not overclocked because my 5v mod almost screwed up my board so now my voltages are all messed up.... was at 1936mhz like 2 minits ago...

[alinosa]

pc parts in sig...

BIX radiator, maze3, tygon tubing, eheim 1250, 2x 120mm enermax adjustable fans. All moving about 14 oz of water and water wetter. temps are: (with asus pc probe) 44 idle, 47 load
load= prime95 torture test for ~3 hours... All of this tucked into a midsize aluminum case that sucks... but is easy to mod, and doesn't weigh a thing. ie: my pc all put together, watercooling too, weighs the same as antec case with psu. I used the highly accurate " hmmm feels the same to me" method... but it DID feel about the same...
and right now i'm o/c'd to 1846 at these temps....

[plague]

check the sig.

I have a compunurse with the tip trimmed so the actual probe is touching the core and I'm usually 38-40C. hit 43 yesterday when it was reeeeaaal hot in my house until the AC went on.

Oh, btw, those temps are all 100% load. I don't even know what idle is anymore (http://www.overclockers.ws)

[rogerdugans]

The pc specs:
Athlon XP1700 unlocked
Epox 8KHA+ ...volt mods: vcore and Hoot's 5v mod
256mb generic pc2100
a hard drive
cd
cdr
Chenming mid tower (the common one :) )
Enermax 431w psu
cpu is at 2v
ram at 3.1v

Water cooling parts:
Swiftech H202c kit (QPower without the case)
radiator is external, 2 mechatronics 120mm fans, shroud box

tubing is lengthened for experimentation purposes, etc, and right now I have a second small pump to see if boosting flow rate helps compensate for long lines....doesn't look like it matters.

Temps:
ambient- 27c
water- 31c
case- 28c
cpu- 44c

temps are pretty bad right now: insulated for a chiller system, and after running a short while- 24hrs- found that a solder joint let go. Temps have been 4 to 6c higher since.

[splateee]

AMD XP 1800
Soyo dragon +
768 megs ram (generic variety)
40 gig western digital hd
visiontek Geforce 4 ti4600
22" NEC monitor
Watercooling:
swiftek water cooling kit & there case

temps=cpu 29c
system=20c

I was very happy with the Swiftek cooling kit, it was a breeze to set up especialy with their case that was designed for it.

[basilisk420]

XP1900+@1.68GHz
Visiontek G3 Ti200 @220/470
512M Crucial PC2100 Reg. ECC
Abit KG7 RAID
IBM 10K U160 18GB
WD 28GB 7200 ATA100
RIO 180:(
Unknown 3/8" block
12"x5" el-crappo rad
modded full-tower w/4c120mm Panaflo M1A's--variable speed

ambient=24º
case=27º
load=36º

Movin' up to quality cooling in a few short weeks:beer:

[Indigo_ts]

Eheim 1250
HomeDepot Electrical box as a Res
2x Be Cooling Jagged Edge waterblocks
Oil Cooler with 3 80mm fans
All On:
Dual 1.2 MPs
Tyan Tiger MP
512mb ECC DDR
With Temps of:
Idle:
CPU 1 = 43
CPU 2 = 45
Load:
CPU 1 = 46
CPU 2 = 48
According to Tyan System Monitor

[mrm1957]

Cooling: Swiftech MCW372, 6 feet of 3/8 vinyl tubing, Ford F350 aluminum heatercore 7" x 7" 1/2" line in and out of rad, 5 gallon bucket resevoir. Rio 600 rated @ 200 GPH. Case cooling has 1 intake 68CFM Delta, 2 exhaust Coolermaster 30 CFM fans.

PC: See sig

Temps: Ambient: 70F - 22C
Idle: 91F - 33C
Load: 102F - 39C
Case: 91F - 33C


Wish it was a little cooler.

[Colin]

My current main rig is a pair of 1.8 Gig Prestonia Xeons in a Swiftech Quiet Power with MCW462U waterblocks.

CPU 1
Idle 2C over ambient
Load 8C over ambient

CPU2
Idle 3C over ambient
Load 9C over ambient

[packratbob]

PC
Epox 8kha+ (almost vmod if i got the right risistor) lol
XP1800@1.757ghz
512 ddr samsung 2x256 pc2100
wd200bb 7200rpm <<< it sucks!!!! need a new one
gf2 ti 350/470 <<< this sucks too need somthing better.
psu 450W codegen
full tower case.

Custom h20 Cooling

rio2100 pump capable of 600gph but is more like 300 at the moment
kh laser heater core with 4 fans and lotsa duct tape.
home made water block with nothing but a drill and drill bit.
pvc tubing and a lot of clamps.

temps as of now!!!
ambient 18c
water 21c
cpu32.c
its folding at the moment.

[overdoze]

One of the old WC system still doing well consider cooling chipset, cpu and PS. Active fan speed controlled.

[Malakai]

he good thread, BUMP!

athlonXP 1600+, back at 1.85ghz 2.13vcore (need to update the sig)
37-40c load (whats idle??:)), depending on house temps. temps are taken with the flat DigiDoc 5 thermal sensor krazy glued running along the side of the core (trimmed a bit too, its as close to actualy touching the coe as its ever gonna be)
Danner 500gph mag drive, Swiftech MCW462-UH 1/2in block, D-tek 87 chevette heatercore w/shroud, and 1 130cfm 120mm Sunon high flow radiator fan, all 1/2in silicon tubing(ordering Tygon now)


silicon tubing sucks, u lose a lot of water to "sweating" of the tubes:(
Tygon looks to be a good choice

[CSaddict]

Most is in my sig but here goes
DD maze 2 lapped to a beautiful luster LOL
Ford heatercore mounted in the top of the case sideways to allow air to blow in on side, through the core and right back out.
Aquavia 1300 pump
1/2 silicone hose
NO res
water wetter.

the machine is currently gutted because the motherboard fried, had nothing to do with the WC setup. It doesn't leak.

never once ran over 32C full load.

[Mr_Scrub]

Check sig. Temps from MBM therefor irrelevent, but they dropped 15c under load from stock AMD HSF...

[Malakai]

Originally posted by CSaddict
Most is in my sig but here goes
DD maze 2 lapped to a beautiful luster LOL
Ford heatercore mounted in the top of the case sideways to allow air to blow in on side, through the core and right back out.
Aquavia 1300 pump
1/2 silicone hose
NO res
water wetter.

the machine is currently gutted because the motherboard fried, had nothing to do with the WC setup. It doesn't leak.

never once ran over 32C full load.

:eek:!

what are measuring temps with? why not Vmod and crank the speed with that good of a cooling setup? i bet u could push 2.3vcore and not go over 42c, prolly not 40.

1.9ghz 1600+'s are nice:D

[ajrettke]

Maze2 1/2" barbs, 89 camaro heatercore, 6.75" fan, eheim 1250....
temps are 52c full load (8k3a temp probe) 2.05v XP1800@1777

[JFettig]

Originally posted by Malakai


:eek:!

what are measuring temps with? why not Vmod and crank the speed with that good of a cooling setup? i bet u could push 2.3vcore and not go over 42c, prolly not 40.

1.9ghz 1600+'s are nice:D

from those speeds it seems that he doesnt have a agoia stepping.... if he did im sure he would know better than to just let it go that slow;)

[Element-Xero]

Well I don't have it installed yet but its on order!

-Eheim 1250 pump
-Tygon Tubing(1/2")
-Dtek Spir@l Waterblock (1/2")
-DD Geforce 2/3 Waterblock (1/2")
-Dtek Unpainted Heatercore/shroud combo
-2x Panaflo 120mm 69cfm nearly silent in push/pull
-Green UV Dye :rolleyes:

[Nico3k]

Eheim 1060 600GPH Pump
1/2" Tygon R-1000 Limited Tubing
Danger Den Maze3 CPU Waterblock
Danger Den GeForce4 GPU Waterblock
Danger Den Z-Style Chipset Waterblock (soon)
D-Tek Hard Drive Waterblock
Danger Den Clear Reservoir
Black Ice Extreme



:D I(heart)DD

[bongo]

Epox 8k3a+
Amd 1800+ AGOGA "Y" @ 1880 mhz 2.1 vcore , (188 fsb x 10)
Samsung pc2700 512Mb ddr
(still burnin in the proc and ram ;)) - (probably end up getting nice Agoia)
Cooled with:

TC-4 rev.2
Danner 500 GPH pump
Chevette'86 Heatercore w/shrouds and two panaflos in push/pull
4 feet of TYgon 1/2" ID - 1/8" OD
PVC tube @irtrap.
Water: 88% distilled water / 2% UV dye / 10% Waterwetter

Temps:

Idle - 30 C
Laod - 36 C/ 38C
Ambient - 28 C (roomtemp)

[SkiFletch]

Duron 700@1018
Abit KT7a
GeForce DDR
other crap


Gemini High Flow
Gemini Chipset block
Serck Radiator
Via Aqua 1300
NO fans at all, only psu fan


ambient 23c
case 27c

chipset:
idle ~34c
load 38c

cpu:
idle ~35c
load 41c


too bad i just broke the frikking fitting off my gemini. off to home depot tonight to get a replacement.

[Rav]

AthlonXP @ 1736 Mhz (11.5x151) 1.82V (AGKGA Y)
MSI K7T266 Pro (NB fan)
256mb Kingmax PC2700 CAS2.0 (heatspreader)
Radeon 64MB VIVO 183:366
SB Live! Plat
Linksys 10/100
WD 80GB 7200 + Maxtor 27GB 5400
Plextor 12xCDR + Pioneer 16xDVD
Enermax 330W dual fan
Full tower case

5x80mm case fans (front, side, back, 2x HDD top -> Rad)

DD Maze2, Cube1, Panaflo 120mm, Eheim 300gph, water wetter

Load 32C case, 36C CPU (mobo sensors...)

The KT266 is a bit dated, holding my FSB back, and my voltages are bad.

-Rav

[ciz28]

ABIT KX7-333
AMD Athlon XP 1700+ @ 166MHz * 10.0 - 1.55v
512MB Samsung PC2700 DDR SDRAM @ 2.5-2-5-2-2-2T
VisionTek GeForce4 Ti 4400 @ 300MHz/650MHz
Zoltrix Nightingale Pro 6
Hauppauge WinTV Go
SMC 1211TX
40GB Seagate Barracuda ATA IV
16X Pioneer DVD-106S
40/12/40A Plextor
Eheim 1250 Pump
Maze3 Water Block
DD GeForce4 Water Block
Black Ice Xtreme
1/2" Silicon Tubing
120MM Papst 4312L @ 7V
35c idle, 55c load

[Deltree]

My home brewed H2O unit consist of a 90 gph home depot
special, transdap trany cooler and a home made slot 1/A water
block that I have shimmed up with a .150 thousandth thick
cold plate to clear all the mobo stuff. It keeps my AMD1400
running 1500, 150X10 @ 45*C 100% load. The key to this
system is the 5 gal. reservoir. With the old 2 gal it would slowly
creep up in temp.
I have a 200 gph pump and I'm looking for copper for my
revised system some guys last night turned me on to some grate
sites for raw materials. I'm going to a p4 1.8a along with the
up dated H2O cooler. My current cooler has been around
since 1999.

[Wicked Klown]

AOpen AX34 ProII
Celeron 800@1066 Direct Die cooled with 2cool rad and two Enermax 120mm Adjustable speed fans. Temps 21.8C at load.

[TonyMc]

Water cooler:
Via aqua submerged in a res built by webmedic
chevette heater core, EBM 150mm 212CFM fan in a custom shroud also made by webmedic.
Spir@L
Tygon 3603
distilled water/ Hyperlube supercoolant mix

Temps:
CPU= 42°c idle, 47°c load.
System= 32°c
Ambient= 28°c

Hardware:
Epox 8K3A+
XP 1900+ (not O/Ced yet I just installed this MOBO 10 min ago will give update)
Visiontek geforce3 Ti200
256MB DDR333 kingmax
linksys LAN
Currantly down to 1 20 gig W/D HD
Plextor 40/12/40A burner
generic 56x CD drive
Yadda, yadda, yadda...