- Joined
- Jun 5, 2003
- Location
- B.C. Canada
I disassembled the ATX power connector in order to sleeve the wiring. Although I marked the wire colours with the connector I did not take note that some of the pins have two wires going to that pin.
Example: 5V line (red wire) and 3.3V (orange wire) each have one pin with two of these wires connected.
Because there are other red and orange wires I am not sure if these pins are in the proper place.
I am having some stability problems with my ram at different Vdimm settings and not sure if it could be related.
Power supply is Antec SL 400 Smart Power
Thanks
Example: 5V line (red wire) and 3.3V (orange wire) each have one pin with two of these wires connected.
Because there are other red and orange wires I am not sure if these pins are in the proper place.
I am having some stability problems with my ram at different Vdimm settings and not sure if it could be related.
Power supply is Antec SL 400 Smart Power
Thanks