Ok guys, I'm running on:
2.4c philly
ic7
antec 550 true
kingston hyperx 3500
I can't seem to get past 275fsb at all. I tried 3:2, but no luck there. I can ran stable at 275fsb and 1.68vcore. MY vdimm is set to 2.8. My cooling is more than suffient, so thats not the issue. I have a honeywell fan blowning right at the pc, which brings the temps down considerably. Please, any advise would be appreciate.
Btw, Intially I was running the system off an enlight 300w and got the same results as the antec 550. That sucks, because now I have this expensive psu that gives me the same performance as my enlight 300w.
2.4c philly
ic7
antec 550 true
kingston hyperx 3500
I can't seem to get past 275fsb at all. I tried 3:2, but no luck there. I can ran stable at 275fsb and 1.68vcore. MY vdimm is set to 2.8. My cooling is more than suffient, so thats not the issue. I have a honeywell fan blowning right at the pc, which brings the temps down considerably. Please, any advise would be appreciate.
Btw, Intially I was running the system off an enlight 300w and got the same results as the antec 550. That sucks, because now I have this expensive psu that gives me the same performance as my enlight 300w.