- Joined
- Apr 30, 2008
- Location
- Birmingham, UK
I am having alot of troube even overclocking by a small amount. I can post up to 3.6Ghz with 1.35Vcore (haven't tried higher), but as soon as I log on and starts loading applications it freezes. Even at 3.0Ghz it does this.
Setup:
Q9450 (water cooled)
4x2Gb 1066Mhz G.skill RAM (1:1 sync mode)
EVGA 780i A1
2 x EVGA 8800gts SSC (820/2033/2300)
Antec 900 Case
Vista 64 bit ultimate
Voltages:
CPU - Have tried all the way up to 1.4V, including 1.2V, 1.3V, 1.35V, 1.4V
Memory - Tried default (1.85V), 2.1V (rated voltage on memory)
FSB - 1.2V
SPP - 1.4V
MCP - 1.525V
SPP<-> MCP - 1.25V
Is there anything I am missing? Any one have a good idea of what to set voltages at? I want to overclock to around 3.2Ghz - 3.6Ghz, which should be achievable...
Setup:
Q9450 (water cooled)
4x2Gb 1066Mhz G.skill RAM (1:1 sync mode)
EVGA 780i A1
2 x EVGA 8800gts SSC (820/2033/2300)
Antec 900 Case
Vista 64 bit ultimate
Voltages:
CPU - Have tried all the way up to 1.4V, including 1.2V, 1.3V, 1.35V, 1.4V
Memory - Tried default (1.85V), 2.1V (rated voltage on memory)
FSB - 1.2V
SPP - 1.4V
MCP - 1.525V
SPP<-> MCP - 1.25V
Is there anything I am missing? Any one have a good idea of what to set voltages at? I want to overclock to around 3.2Ghz - 3.6Ghz, which should be achievable...