I am definately hitting a wall and I am not really sure where or why. I am assuming its my PSU or some serious droop on this ab9 in my sig. However i do not feel its droop either. I was able to get an e6600 to 3.4 24/7 use stable.
My current rig is in my sig.
Current speed 3.00ghz 333fsb x 9. Testing prime stable at stock. Was prime stable at 1.35v
voltage= 1.325 (stock)
Ram is at a 1:1 at 1.9v
I went through the very good OC guide here and disabled any kind of power saving options(for now).
As you can see i have lots of room temp/wise. (its cold as heck in here, no heat until Jan, my rule ) Plus the tuniq does a good job cooling as well as I will lapping this badboy after i get a chance to test it out and put it through its paces. Any suggestions ideas?
Temps are in the mid to lower 40's when running prime
My current rig is in my sig.
Current speed 3.00ghz 333fsb x 9. Testing prime stable at stock. Was prime stable at 1.35v
voltage= 1.325 (stock)
Ram is at a 1:1 at 1.9v
I went through the very good OC guide here and disabled any kind of power saving options(for now).
As you can see i have lots of room temp/wise. (its cold as heck in here, no heat until Jan, my rule ) Plus the tuniq does a good job cooling as well as I will lapping this badboy after i get a chance to test it out and put it through its paces. Any suggestions ideas?
Temps are in the mid to lower 40's when running prime
Last edited: