Results 1 to 7 of 7
  1. #1
    New Member
    Join Date
    Jul 2002

    Unhappy Help... Help Me Please!!!!

    Help please........ recently, i took out all the components from my comp to clean it (it was reaaaaaalllly dusty) and cut a hole. After my friend and I put it back together, he connected all the fans really messy so there was wires blocking alot of air flow. when we turned on the comp,,, everything was all right. well... i disconnected the comp again and rewired my fans in a much for organized way, only this time when i hooked my comp back up, i also connected my printer and stuff (note: my printer was on). when i pushed the power button, the printer sucked up and spat out a sheet of paper but my comp did not turn on. now, it just wont turn on. I know it has power because the led on the motherboard lights up. I NEED HELP!!!! PLEASE, WOULD AN EXPERT PLEEEEEAAASSSEEEE GIVE A SUGGESTION!!!!! Note: all the pins are in correctly.

    here are my comps stats:
    Motherboard: AAbit ST6 RAID
    CPU: Intel Celeron Coppermine 866 (not overclocked)
    Case: Antec SX630 (its the small one)

  2. #2
    Member Cown's Avatar
    10 Year Badge
    Join Date
    Jun 2002
    Location
    Denmark
    First of all welcome to the forums

    Try disconnecting all the fans again and see what happens.
    If your computer posts try connecting the fans one at a time, one or more of the fans could be makeing a short somewhere.

    GL
    Intel Core i7 2700k @ 3,95 Ghz / EK Supreme EF
    ASUS Maximus V Gene
    Corsair Vengeance 16 Gb PC3-12800 @ 1866 Mhz 9-10-9-24
    EVGA GeForce GTX 780 Ti Dual Classified w/ EVGA ACX Cooler
    2 x OCZ Vertex 3 120 Gb SSD RAID 0
    Lian-Li PC-A10B
    Corsair TX750W PSU
    Windows 8.1 64-bit


    Project: ROG meets Lian Li

  3. #3
    New Member
    Join Date
    Jul 2002
    i tried dis connecting the fans once, but i will try again, thx. if u have any other suggestions, i would really really appreciate it.

  4. #4
    Member Cown's Avatar
    10 Year Badge
    Join Date
    Jun 2002
    Location
    Denmark
    Well from my point of view the other option might by that a short has occured on the motherboard or in the PSU. Have u tryed another PSU ? If not try that. You mention that u have power cuzz your mobo LED is on but does your CPU fan and harddrive turn on (rotate/power up) when u hit the power button or does the comp just remain off?

    Enywayz try with another PSU (Power Supply Unit)
    Intel Core i7 2700k @ 3,95 Ghz / EK Supreme EF
    ASUS Maximus V Gene
    Corsair Vengeance 16 Gb PC3-12800 @ 1866 Mhz 9-10-9-24
    EVGA GeForce GTX 780 Ti Dual Classified w/ EVGA ACX Cooler
    2 x OCZ Vertex 3 120 Gb SSD RAID 0
    Lian-Li PC-A10B
    Corsair TX750W PSU
    Windows 8.1 64-bit


    Project: ROG meets Lian Li

  5. #5
    New Member
    Join Date
    Jul 2002
    well... i tried diconnecting the fans again, but nothing happened. When i hit the power button, nothing happens at all. ya.... mabey i will borrow my friends PSU to see if that is the case. hmmmm.... any other suggestions?

  6. #6
    Member
    Join Date
    Feb 2002
    Location
    Theresa, Wisconsin
    This may seem like a dumb question, but is everything connected firmly? And is your power button plugged in all the way/correctly? I recently had a similar problem where my comp wouldn't start, so I checked the power button wires and re-attached them and it started.

  7. #7
    Member
    Join Date
    Feb 2001
    Location
    near ORD,IL
    I had a problem similar to this b4 and it was caused by a not so tightly connected ATX pwr connector.
    A creative solution (that works :)) is a good solution.

    My setup: Ghetto Celeron 600, Athlon XP 1600+ (currently OOS), and A64 3200+ - "yay it finally works!!"

    My Heatware

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •