Page 1 of 2 1 2 LastLast
Results 1 to 20 of 32
  1. #1
    Member Cown's Avatar
    10 Year Badge
    Join Date
    Jun 2002
    Location
    Denmark
    Posts
    919

    What temps do u guys get with watercooling ?

    As topic says...

    I would like to know both idle temp and full load temp plz
    Intel Core i7 2700k @ 3,95 Ghz / EK Supreme EF
    ASUS Maximus V Gene
    Corsair Vengeance 16 Gb PC3-12800 @ 1866 Mhz 9-10-9-24
    EVGA GeForce GTX 780 Ti Dual Classified w/ EVGA ACX Cooler
    2 x OCZ Vertex 3 120 Gb SSD RAID 0
    Lian-Li PC-A10B
    Corsair TX750W PSU
    Windows 8.1 64-bit


    Project: ROG meets Lian Li

  2. #2
    Underwater Senior Member
    10 Year Badge
    Join Date
    Nov 2001
    Posts
    6,609
    I have an Abit AT7, and an XP2100+ running stock clocking.
    I also have a northbridge waterblock and one on my video gpu in series (slow waterflow).
    My temps measure 35C idle, 37C full load.
    My board uses the in socket thermister, as Abit hasn't done diode reading on this board

    I've just built this system, and have lots of tweaking to do yet. Right now I'm just too lazy to go for better temps.
    Last edited by Diggrr; 07-03-02 at 05:07 PM.

  3. #3
    Unoriginal Macho Moderator nikhsub1's Avatar
    10 Year Badge
    Join Date
    Oct 2001
    Location
    Los Angeles
    Posts
    9,678
    I get around 49-53C load running folding with my h20, my mobo (8K3A) reads the on dies sensor in the CORE. Idle, what's that?

    <-----EDIT----->
    Look at my sig for CPU specs, that sucker is putting out almost 120W of heat!
    Last edited by nikhsub1; 07-03-02 at 05:09 PM.
    Loading Signature ...

  4. #4
    Linux challenged Senior, not that it stops me... rogerdugans's Avatar
    Join Date
    Dec 2001
    Location
    Corner of No and Where
    Posts
    5,956
    I'm another one that has no idea of idle temp- sorry!

    BUT: I'm currently at 46c with an XP1700@1741 in a volt-modded Epox mobo. Vcore is 2.05v, vdimm is 3.2v.
    And its QUIET.
    Still overclocked and running linux on watercooled computers after all these years.

  5. #5
    Member portorock's Avatar
    Join Date
    Feb 2001
    Location
    Quantico, Va but am from Queens, NY
    Posts
    1,318
    Same here, no idle. Fold 24/7. Load:46 XP1600+@1.63 on Gigabyte GA-7VRXP Vcore +5% Dimm voltage:default

  6. #6
    Member Puer Aeternus's Avatar
    10 Year Badge
    Join Date
    Sep 2001
    Location
    In your head (Ottawa.Canada)
    Posts
    2,652
    Jeez..I am getting 48c on load w/ air cooling and I only have 2 exhaust, vid card fan mod and a duct for my Volcano 7+.

    I kinda thought you Water cooling folks would be getting low 30's on load?
    Your Belief System is B.S. An Inflexible Belief System is I.B.S

    i5 4670K @ 4.4GHZ
    Water Cooling- Seidon 120m,
    Gigabyte GA-Z87X-OC,
    8 g's Mushkin Blackline 1600 dd3,
    Radeon 7970 Diamond
    Win 7 64bit, Antec Earth Watts 650w
    InWin Dragon Rider (case)
    Logitech G15

  7. #7
    Linux challenged Senior, not that it stops me... rogerdugans's Avatar
    Join Date
    Dec 2001
    Location
    Corner of No and Where
    Posts
    5,956
    Originally posted by Puer Aeternus
    Jeez..I am getting 48c on load w/ air cooling and I only have 2 exhaust, vid card fan mod and a duct for my Volcano 7+.

    I kinda thought you Water cooling folks would be getting low 30's on load?

    Before volt-mods and summer heat I was
    Still overclocked and running linux on watercooled computers after all these years.

  8. #8
    Member rfeng's Avatar
    Join Date
    Feb 2002
    Location
    Worcester, MA
    Posts
    132
    38 deg under full SETI load with 25 deg ambients.
    Setup is in the sig.

    -JR

  9. #9
    Senior A64 Killer {PMS}fishy's Avatar
    10 Year Badge
    Join Date
    Dec 2001
    Location
    Boston, MA
    Posts
    8,673
    38c Load on main system, see sig.

    1.85v-core 10.5*173 right now.

    Maze2, ViaAqua1300, Heatercore, 3/8" tubing, Inline.
    Pick 2: Speed -- Reliability -- Cost

    Trouble Shooting 101:
    1. RTFM
    2. Repeat Step 1

    6ghz Club Member.


    cw823 Fan Club Founding Member, are you?

  10. #10
    Member Cown's Avatar
    10 Year Badge
    Join Date
    Jun 2002
    Location
    Denmark
    Posts
    919
    Thx for the info, now im gonna get myself some watercooling what would you guys recommend? I WANT THE BEST

    I was thinking of buying this CPU water block:
    http://www.studiedata.dk/product.asp?product=320&page=1

    But i dunno much about water cooling yet... eny help is appreciated. thx
    Intel Core i7 2700k @ 3,95 Ghz / EK Supreme EF
    ASUS Maximus V Gene
    Corsair Vengeance 16 Gb PC3-12800 @ 1866 Mhz 9-10-9-24
    EVGA GeForce GTX 780 Ti Dual Classified w/ EVGA ACX Cooler
    2 x OCZ Vertex 3 120 Gb SSD RAID 0
    Lian-Li PC-A10B
    Corsair TX750W PSU
    Windows 8.1 64-bit


    Project: ROG meets Lian Li

  11. #11
    Registered COOLER-ENGINEER's Avatar
    Join Date
    Jul 2002
    Location
    Good old Germany
    Posts
    70
    This is one of the best cooler on the market.
    However, he also high costs one.
    or look heer
    this is almost just as good. However, is the clip of the Innova brilliantly and very well

    Greetz
    C-E

  12. #12
    Member FIZZ3's Avatar
    Join Date
    Jun 2002
    Location
    NL, Europe
    Posts
    3,127
    Originally posted by Cown
    Thx for the info, now im gonna get myself some watercooling what would you guys recommend? I WANT THE BEST

    I was thinking of buying this CPU water block:
    http://www.studiedata.dk/product.asp?product=320&page=1

    But i dunno much about water cooling yet... eny help is appreciated. thx
    An Innovatek system certainly would do you no wrong. It's a very capable system. What are you going to buy for pump/rad/res?
    Desktop:
    Intel C2D E6700 @ 2.67Ghz / TR AXP-140 | Asus P5W DH Dlx | Corsair TwinX 4Gb PC6400 CL4
    Nvidia 8800 GTS 640Mb / TR HR-03 | Creative X-Fi
    2x WD Raptor 150Gb | Plextor PX-760SA
    Lian Li V2000 Plus | Corsair HX620
    Dell 2407WFP | Logitech Z-5500

    Laptop: Sony VAIO Z11
    Intel i5-520M | 4Gb | Nvidia GT330M | 2x64Gb RAID-0 SSD | 13" 1600x900 panel

  13. #13
    Member Cown's Avatar
    10 Year Badge
    Join Date
    Jun 2002
    Location
    Denmark
    Posts
    919
    Originally posted by FIZZ3


    An Innovatek system certainly would do you no wrong. It's a very capable system. What are you going to buy for pump/rad/res?
    I was thinking about this radiator (its small and i can fit it almost enywhere ):
    http://www.studiedata.dk/product.asp?product=181&page=1

    This Pump:
    http://www.studiedata.dk/product.asp?product=222&page=1

    This reservoir:
    http://www.studiedata.dk/product.asp?product=226&page=1

    Thats about all im gonna need right? Have this other page here: What accessories do i need? besides the tubes of corse
    http://www.studiedata.dk/group.asp?group=168
    Intel Core i7 2700k @ 3,95 Ghz / EK Supreme EF
    ASUS Maximus V Gene
    Corsair Vengeance 16 Gb PC3-12800 @ 1866 Mhz 9-10-9-24
    EVGA GeForce GTX 780 Ti Dual Classified w/ EVGA ACX Cooler
    2 x OCZ Vertex 3 120 Gb SSD RAID 0
    Lian-Li PC-A10B
    Corsair TX750W PSU
    Windows 8.1 64-bit


    Project: ROG meets Lian Li

  14. #14
    Hey! I showered! Senior JFettig's Avatar
    Join Date
    Jan 2002
    Location
    MN
    Posts
    7,634
    everything looks good except the BIX, those arent all that good, you need a heatercore with a shroud.....
    ||http://www.wc101.com - Watercooling101||
    ||http://jfettigmachines.com CNC kits||

  15. #15
    Member TruckChase!'s Avatar
    Join Date
    Dec 2001
    Location
    Minnesota, US
    Posts
    369
    Epox 8k3a+, Ath XP Pal @ 184x9 (1656) @ 2.2v (using on-die thermistor)
    Danger Den Maze2 waterblock, Heater Core & Ehiem 1250 pump

    Load: 50-54 degrees c depending on ambient
    C2D (WK 27"A")on ASUS P5B-E
    3483Mhz/387Mhz FSB 1.454Vcore(Load Actual) 1.575(set)
    Crucial PC-8500 2GB @ 967Mhz 5-5-4-12 2.1Vmem
    ATI x1900XTX @ 739/1700 1.48Vgpu/2.12Vmem
    150GB WD Raptor SATA HD
    OCZ PowerStream 520w PS
    Audigy X-Fi "Fatal1ty" UGH I can't stand endorsements...
    Watercooled CPU/GPU; Mix of Danger Den and homebrew components
    and the best monitor ever made:)
    http://www.bf2player.com/sig/3295585-912.png

  16. #16
    Hey! I showered! Senior JFettig's Avatar
    Join Date
    Jan 2002
    Location
    MN
    Posts
    7,634
    TruckChase! ygpm
    ||http://www.wc101.com - Watercooling101||
    ||http://jfettigmachines.com CNC kits||

  17. #17
    Member
    Join Date
    Nov 2001
    Posts
    298
    Eheim 1250, maze-2, Homemade rad, full 1/2" system.

    Xp-1700 AGNGA @ 1800 with 2.2v, giving out 116watts

    Full load (toast) is about 52*c ambient air is about 23*c, no water temperatures as I have no thermomiter that works.

    All runnin on an 8k3a+ (onboard diode measure) 171fsb fastest timings with Crucial PC-2100.

    Im getting a newer stepping Xp-2000 soon so mt MHZ will go up.

  18. #18
    Member eh?'s Avatar
    10 Year Badge
    Join Date
    Sep 2001
    Location
    Elkhart, Indiana
    Posts
    1,804
    BE cooling waterblock, maxijet1200 pump and a heatercore, temps in sig
    Back and trolling six-fold.

  19. #19
    Member
    Join Date
    Nov 2001
    Posts
    298
    Originally posted by drdingo21
    BE cooling waterblock, maxijet1200 pump and a heatercore, temps in sig
    I think its worth noting the large discrepancy between the temperatures peope are getting on the in socket diode and the onboard Xp diode.

    As you can see lyngo is getting a 5*c delta between ambient and CPU, thats obviously a bit low.
    I get a much higher delta, yet still a good overclock (for a POS AGNGA)

    I

  20. #20
    Member Cown's Avatar
    10 Year Badge
    Join Date
    Jun 2002
    Location
    Denmark
    Posts
    919
    Originally posted by maskedgeek
    everything looks good except the BIX, those arent all that good, you need a heatercore with a shroud.....
    Sry i dunno what you mean im totally n00b at water cooling... kinda the same if you where giving me specs on a refridgerator

    BIX? = u mean the shop?

    you need a heatercore with a shroud..... = ehh ? whats that...

    DAMN i feel kinda stupid
    Intel Core i7 2700k @ 3,95 Ghz / EK Supreme EF
    ASUS Maximus V Gene
    Corsair Vengeance 16 Gb PC3-12800 @ 1866 Mhz 9-10-9-24
    EVGA GeForce GTX 780 Ti Dual Classified w/ EVGA ACX Cooler
    2 x OCZ Vertex 3 120 Gb SSD RAID 0
    Lian-Li PC-A10B
    Corsair TX750W PSU
    Windows 8.1 64-bit


    Project: ROG meets Lian Li

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •