• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

What temps do u guys get with watercooling ?

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.
I have an Abit AT7, and an XP2100+ running stock clocking.
I also have a northbridge waterblock and one on my video gpu in series (slow waterflow).
My temps measure 35C idle, 37C full load.
My board uses the in socket thermister, as Abit hasn't done diode reading on this board :mad:

I've just built this system, and have lots of tweaking to do yet. Right now I'm just too lazy to go for better temps.
 
Last edited:
I get around 49-53C load running folding with my h20, my mobo (8K3A) reads the on dies sensor in the CORE. Idle, what's that?:D

<-----EDIT----->
Look at my sig for CPU specs, that sucker is putting out almost 120W of heat!
 
Last edited:
I'm another one that has no idea of idle temp- sorry!

BUT: I'm currently at 46c with an XP1700@1741 in a volt-modded Epox mobo. Vcore is 2.05v, vdimm is 3.2v.
And its QUIET.
 
Puer Aeternus said:
Jeez..I am getting 48c on load w/ air cooling and I only have 2 exhaust, vid card fan mod and a duct for my Volcano 7+.

I kinda thought you Water cooling folks would be getting low 30's on load?


Before volt-mods and summer heat I was:D
 
38c Load on main system, see sig.

1.85v-core 10.5*173 right now.

Maze2, ViaAqua1300, Heatercore, 3/8" tubing, Inline.
 
This is one of the best cooler on the market.
However, he also high costs one.
or look heer
this is almost just as good. However, is the clip of the Innova brilliantly and very well

Greetz
C-E
 
Cown said:
Thx for the info, now im gonna get myself some watercooling :D what would you guys recommend? I WANT THE BEST :D :D :D :D

I was thinking of buying this CPU water block:
http://www.studiedata.dk/product.asp?product=320&page=1

But i dunno much about water cooling yet... eny help is appreciated. thx :cool:

An Innovatek system certainly would do you no wrong. It's a very capable system. What are you going to buy for pump/rad/res?
 
FIZZ3 said:


An Innovatek system certainly would do you no wrong. It's a very capable system. What are you going to buy for pump/rad/res?

I was thinking about this radiator (its small and i can fit it almost enywhere :D):
http://www.studiedata.dk/product.asp?product=181&page=1

This Pump:
http://www.studiedata.dk/product.asp?product=222&page=1

This reservoir:
http://www.studiedata.dk/product.asp?product=226&page=1

Thats about all im gonna need right? Have this other page here: What accessories do i need? besides the tubes of corse:confused:
http://www.studiedata.dk/group.asp?group=168
 
everything looks good except the BIX, those arent all that good, you need a heatercore with a shroud.....
 
Epox 8k3a+, Ath XP Pal @ 184x9 (1656) @ 2.2v (using on-die thermistor)
Danger Den Maze2 waterblock, Heater Core & Ehiem 1250 pump

Load: 50-54 degrees c depending on ambient
 
Eheim 1250, maze-2, Homemade rad, full 1/2" system.

Xp-1700 AGNGA @ 1800 with 2.2v, giving out 116watts

Full load (toast) is about 52*c ambient air is about 23*c, no water temperatures as I have no thermomiter that works.

All runnin on an 8k3a+ (onboard diode measure) 171fsb fastest timings with Crucial PC-2100.

Im getting a newer stepping Xp-2000 soon so mt MHZ will go up.
 
drdingo21 said:
BE cooling waterblock, maxijet1200 pump and a heatercore, temps in sig

I think its worth noting the large discrepancy between the temperatures peope are getting on the in socket diode and the onboard Xp diode.

As you can see lyngo is getting a 5*c delta between ambient and CPU, thats obviously a bit low.
I get a much higher delta, yet still a good overclock (for a POS AGNGA)

I
 
maskedgeek said:
everything looks good except the BIX, those arent all that good, you need a heatercore with a shroud.....

Sry i dunno what you mean :eh?: im totally n00b at water cooling... kinda the same if you where giving me specs on a refridgerator :D

BIX? = u mean the shop?

you need a heatercore with a shroud..... = ehh ? whats that...

DAMN i feel kinda stupid :p
 
Back