Page 3 of 4 FirstFirst ... 2 3 4 LastLast
Results 41 to 60 of 63
  1. #41
    Disabled
    Join Date
    Nov 2003
    Location
    chicago
    im still scared i migh like deep scratch it

  2. #42
    Vinyl dye is teh only way to get your drive faces and empty panels to match up . Also since one would constantly be touching drives , the dye does not wear but soaks into teh plastics ; where paint will never do the same , wear , chip and/or flake off !!

  3. #43
    Member
    Join Date
    Dec 2003
    Location
    Kansas City area

    Talking I painted away with a spray can

    I recently went to a blue acrylic case and I spray painted my hdd, floppy and cd(crd, etc) black. I used Krylon black spray paint for high heet areas such as grills. I covered all connection slots, etc with tape and they all works fine. Fold for a cure! Hooah!!

    1. XP 2500 (187x12.5) 2. XP 2200 (140x13.5) 3. P4 1.7 (OEM) 4. P4 1.8 (OEM) 5. Dually in process
    Last edited by Papsomax; 01-01-04 at 09:38 PM.

  4. #44
    Member DarkHawk's Avatar
    Join Date
    Mar 2002
    Location
    Salt Lake City, UT
    Originally posted by RoadWarrior
    Hey peeps, got a suggestion, RC car racers use a Lexan based paint that actually bonds to the body shell, just thinking that that might be really nicec for drive and faceplate painting because it will bond to the plastic and not tend to chip off, or scratch easily back through to the white.

    Should be available from hobby stores.

    regards,

    Road Warrior
    Though a note worthy suggestion there is one problem, that paint works sorta backwords. It's intended to be viewed through the body from the underside, so if you flip over the body and look at the paint by itself and not trough a clear plastic its not very good looking, not to mention most of the best RC car paints are 2 step with a a base and a top coat, though they are painted in reverse with the candy coat on first then the backing.

    I was looking at my RC car body as I said this. I need to get that monster fixed! 55 mph and 1/10th scale = approx 550 scale mph, HOLY FAST CAR!

    ___________________________________________
    AMD Phenom II X4 965 Black
    (3.6ghz 200x18)
    ======================================

    MSI 870A-G54
    8 GB Mushkin Silverline DDR3 1333
    Creative SB X-Fi / Logitech X-230
    *Silverstone Raven RV02B*
    Razer Lachesis - Razer Lycosa - Razer Carcharias

  5. #45
    I dont reccomend the method i went.

    Back in my old case. It was a soyo beige. So i spray painted it all black. Even my CD-RW, i didnt have the DVD then. Opened the CD and sprayed a the tray up to about an inch in, when it was out. Then closed it.. and sprayed the front. It still works.. But i dont reccomend doing it.

    Back then i didnt know fully what i was going to do to the drive, that case is long gone.. Now its in my raidmax.. Which i didnt have to paint.. Yet. since i can spray just the metal and take off the acryllic on the front.

    http://www.visionperk.net/callmetbone.jpg

  6. #46
    Member captain_sHiFTy's Avatar
    Join Date
    Dec 2003
    Location
    Canadia Eh
    would you be able to use this kind of method for painting a monitor too? im thinking about repainting my case (too cheap to buy a new one :P ), but i dont really wanna paint it if i cant make my mouse/keyboard/monitor match (yes i am THAT vain).

    is it possible to take the shell off those things without damagingi them so yo ucan paint?

  7. #47
    Member Yamiyanazz's Avatar
    Join Date
    Jan 2004
    Location
    Oregon
    Originally posted by CrystalMethod



    Another thing you can do is to take and exacto-knife and very carefully scrape the paint off raised symbols and letters.
    Sounds like wat too much work...I'll stick with sharpies.

    \Intel Core2Quad Q6600/ \Gigabyte GA-EP35-DS3L / \Windows Vista Ultimate/ \Dell 2007WFP/
    \
    4,096MB A-Data DDR2 800 (2,048MB x2)/ \Chaintech GeForce 9600GT 512MB PCIx16/
    \
    Logitech Z-560 4.1/ \500GB Seagate Barracuda 7200.10/ \Samsung 20x SH-S203B DVD±RW/

    Fold like there is no tomorrow...because for somebody, there may not be.
    Folding User Stats

  8. #48
    Grasshoppa Senior SewerBeing's Avatar
    Join Date
    Jan 2004
    Location
    The truth?? You can't handle the truth!!
    sharpies work very nicely when coloring the drive face-plates, they are cheap. Its easy to do, no need to remove everything, and it looks great. Oh yeah no need for sand paper.
    "Unlike Windows, Linux tries to happily coexist with other OS's. It's not like Windows which will go out of its way to break other installs." MRD
    "On the second day of the seventh month, in the third year of the new milenium, Wedo looked down and saw new pow-ah join team 32, and it was good." Wedo
    "I switch Oses like most people change pants. :)" rogerdugans
    "Always be sure to flash your bios during lightning storms!" MRD

    Please Fold for team 32!
    portage > apt > source > rpm > windows update
    Gautam is a water buffalo

  9. #49
    Registered
    Join Date
    Mar 2004
    Great Great Great guide, im am giong to do it when i get my new drives. wOot

  10. #50
    Member Tnick24's Avatar
    Join Date
    Oct 2003
    Location
    Rochester, NY
    just did my dvd, cdrw and rec cd drive. also i did my flopy, which was a bit harder. but now they look sweet.

  11. #51
    Member dead_man311's Avatar
    Join Date
    Sep 2003
    Location
    Some where in Michigan
    Very Nice , i just pulled the face plate off mine the other day and tooks some black spray paint to them , lol i was lazy

  12. #52
    Member syberspy9's Avatar
    Join Date
    Sep 2003
    Location
    Salmon Arm BC CANADA
    ya nice but i just grabed some black stove paint taped up my cd drives with them closed stuffed cotten in the headphone hole and sprayed them (can virtical) mabey 6 thin layers then it was done (stove paint works soooooooooooooooo good i mean sooooooooo good

  13. #53
    Member Prot's Avatar
    Join Date
    May 2003
    Location
    Lafayette, Louisiana
    I am thinking of getting some of those paint markers from Hobby Lobby. It seems like that would be less work for painting drive face plates. They could also be used to draw designs on the case itself.
    Have you had a zerbert today?

  14. #54
    Member BPM's Avatar
    Join Date
    Sep 2003
    Location
    Fort Worth, TX
    Not a great picture, but the 2 drives up top were originally beige. I used the Krylon Fusion paint and was very impressed. The only surface prep I did was to thoroughly clean the surface.

    I could not remove the bezel for one of my drives, so heres what I did:
    -(very carefully) Put masking tape over the volume dial to protect it from getting glued stuck with the paint.
    -Used a toothpick to plug the emergency disk-release hole.
    -Cover the drive LED with a tiny piece of masking tape.

    Lappy - Dell E1505 - 1.6ghz Intel Pro Duo
    PC - Intel i7 920
    - Gigabyte EX58 UD3R
    - 3GB Corsair XMS triple channel
    - PNY GTX 260 core 216
    - Asus 23" widescreen LCD
    - Dell 19" LCD
    - BFG 550w PSU

    3DMark06 v.1.1 - 15,850

    My Heatware

  15. #55
    Member wildbilly2k's Avatar
    Join Date
    Jul 2001
    Location
    Arizona
    Quote Originally Posted by BPM
    I could not remove the bezel for one of my drives, so heres what I did:
    -(very carefully) Put masking tape over the volume dial to protect it from getting glued stuck with the paint.
    -Used a toothpick to plug the emergency disk-release hole.
    -Cover the drive LED with a tiny piece of masking tape.
    Does that drive's front cover stick to the tray when it comes out?

  16. #56
    Member BPM's Avatar
    Join Date
    Sep 2003
    Location
    Fort Worth, TX
    Quote Originally Posted by wildbilly2k
    Does that drive's front cover stick to the tray when it comes out?
    Ahhh yes, forgot to mention how I prevented that.

    This thought crossed my mind before painting, so I tore a strip of paper and placed it in the slot between the tray and the bezel. This kept the paint from getting in the cracks.
    Lappy - Dell E1505 - 1.6ghz Intel Pro Duo
    PC - Intel i7 920
    - Gigabyte EX58 UD3R
    - 3GB Corsair XMS triple channel
    - PNY GTX 260 core 216
    - Asus 23" widescreen LCD
    - Dell 19" LCD
    - BFG 550w PSU

    3DMark06 v.1.1 - 15,850

    My Heatware

  17. #57
    Registered 2FastFX's Avatar
    Join Date
    Jun 2004
    I have disassembled a few CD-ROM drives, and removing the faces on them can sometimes be tricky. Lite-On is one that had me stumped for a few minutes. The cover over the CD slot is attached to the tray and doesn't fold open like some drives do. It appears to be permanently attached to the tray, but it isn't. If you slide this cover straight up it comes right off.

    A word of advice... If you're building a new system and know you are going to mod the case try to pick out drives that are black. The buttons will be the same color as the face and will go with whatever paint scheme you decide. And the black never wears off since the buttons are solid black plastic. Silver works good too if your case has any chrome or silver trim anywhere on it, but sometimes the silver drives are just white plastic painted silver, and the buttons are painted on these too. Ever seen an old car stereo when the paint starts wearing off the buttons? =)

  18. #58
    Quote Originally Posted by alinosa
    FYI: testors model spray paint works great because it coats thin with good color coverage. and... 1246 (silver) matches the silver color on chieftec cases to a tee. my drives look like they were painted by chieftec.
    GREAT advice. i went out and got some Testors 1246 a couple of days ago. i primed my drive with Krylon Fusion (white) and then painted with the Testors. and the drive matches my Lian Li PC-60 exactly. easy as pie and a perfect match. ill post a picture later when i have my system all set up.

  19. #59
    Member
    Join Date
    Jan 2005
    Location
    Edmonton, Canada
    has anyone tried the adhesive metal on a whole case? how big strips can you get? is it possible to join them on the side of your case without leaving a visible seam.

    (bet nobody can guess what i'm thinking of doing )

  20. #60
    I
    Am Ghetto.

    i just pulled out the whole drive, ( actually, a cd-rom drive and a 1.44) stood it up in the basement and attacked it with cheap spraypaint.
    not a perfect match, but its fine for me. Caution: would consider this the ultra-barebones version for that spare drive that you probably wont use anyway.
    yeah, i got paint in the headphone jack, but who uses them? ( at least i never knew what to do with the things, used one once in like '95...)
    that being said, i am at a loss to explain how the paint stuck to the plasitc,
    or how i diddnt cause problems getting paint where it shouldnt be ( get things stuck, drip in there whatever.) -
    thats the ghetto way i guess...probably as cheap as it gets if youre lucky.

Page 3 of 4 FirstFirst ... 2 3 4 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •