Page 1 of 4 1 2 ... LastLast
Results 1 to 20 of 63
  1. #1
    Member jdmcnudgent's Avatar
    Join Date
    Jan 2002
    Location
    tOLEDO, OHIO, the heart of it all!
    Posts
    4,683

    Talking hey ras, post it here.

    post it here in this thread. thanks buddie.

  2. #2
    counselor of clock Rasputin'sLiver's Avatar
    Join Date
    Jun 2002
    Location
    Cleveland
    Posts
    1,676
    sorry man. didn't notice your thread until now, but I think you got it already right?

    How's it working out?

  3. #3
    Member jdmcnudgent's Avatar
    Join Date
    Jan 2002
    Location
    tOLEDO, OHIO, the heart of it all!
    Posts
    4,683
    Originally posted by Rasputin'sLiver
    sorry man. didn't notice your thread until now, but I think you got it already right?

    How's it working out?
    yeah, got it. i need to pin mod the chip before i can see any real results. i attempted it today foe 1.8, and it failed, so later when i get some time, ill try again.

  4. #4
    counselor of clock Rasputin'sLiver's Avatar
    Join Date
    Jun 2002
    Location
    Cleveland
    Posts
    1,676
    Originally posted by jdmcnudgent
    yeah, got it. i need to pin mod the chip before i can see any real results. i attempted it today foe 1.8, and it failed, so later when i get some time, ill try again.
    which way are you going? wire or defroster? either way, good luck and remember that i had dd reserve a place for you in his 3ghz mafia

  5. #5
    Member jdmcnudgent's Avatar
    Join Date
    Jan 2002
    Location
    tOLEDO, OHIO, the heart of it all!
    Posts
    4,683
    Originally posted by Rasputin'sLiver


    which way are you going? wire or defroster? either way, good luck and remember that i had dd reserve a place for you in his 3ghz mafia
    im doing the wire mod, i cant find the defogger kit anywhere around here.

  6. #6
    counselor of clock Rasputin'sLiver's Avatar
    Join Date
    Jun 2002
    Location
    Cleveland
    Posts
    1,676
    Originally posted by jdmcnudgent
    im doing the wire mod, i cant find the defogger kit anywhere around here.
    you'll get it done with the wire. your advice to me was great -- one strand of speaker wire wrapped tight. i pre-tightened it sort of like a noose, crimped the noose end closed as much as possible (kinda shaped like the eye of a needle when it finally worked) I "threaded the needle" with the 2 pins, and then the hard part was twisting it even a little tighter and keeping it on the pins......Arggghhhhhh! it took me at least an hour and one failed install before i got it right. hang in there!

  7. #7
    Member
    Join Date
    May 2002
    Location
    FL, USA
    Posts
    264
    on this note when I get my 2.26B which method should I use? (asuming that it needs it ) I already have a defoger kit and something like 250+ feet of monster cable...

    Either way work better? if not then which is easier...

    Brian

  8. #8
    Member Darryl_D's Avatar
    Join Date
    Apr 2002
    Posts
    918
    WAIT WAIT WAIT WAIT WAIT WTF are you guys talking about?? DID JD get a 2.26B???? IS HE DOING IT IS HE TRYING TO HIT 3GHZ!!!! MORE IMPORTANTLY IS HE EVAPORATING THE CHIP!!! NOOOOOOOOOOOOOOOOOOOOOOO i knew it! JD was conspiring against me all along! that's it i'm going to vid pin mod my chip now too! And when i do we'll see how far i can take it past 3017mhz MWHAHAHAHAHA!!! JD good luck! Hope your chip doesn't burn out forcing you to RMA it and delaying you to 3ghz (doesn't it feel nice to know you have my support )

  9. #9
    Member jdmcnudgent's Avatar
    Join Date
    Jan 2002
    Location
    tOLEDO, OHIO, the heart of it all!
    Posts
    4,683
    Originally posted by Darryl_D
    WAIT WAIT WAIT WAIT WAIT WTF are you guys talking about?? DID JD get a 2.26B???? IS HE DOING IT IS HE TRYING TO HIT 3GHZ!!!! MORE IMPORTANTLY IS HE EVAPORATING THE CHIP!!! NOOOOOOOOOOOOOOOOOOOOOOO i knew it! JD was conspiring against me all along! that's it i'm going to vid pin mod my chip now too! And when i do we'll see how far i can take it past 3017mhz MWHAHAHAHAHA!!! JD good luck! Hope your chip doesn't burn out forcing you to RMA it and delaying you to 3ghz (doesn't it feel nice to know you have my support )
    hey son, no i didnt get a 2.26b, i am trying to get to 3.0 gig the hard way, 1.6a i missed on the pin mod again. will try again tomorrow. i got 437 mhz to go , and no, i am not using the vapo right now, im on air, thats right air. thank god im not using the vapo, because everytime i mess up on the wire mod, it is a pain in the ass to take off the evaporator. btw, the ram i got is phenominal, it kicks ass.

  10. #10
    Member JudgeDredd's Avatar
    Join Date
    Apr 2002
    Location
    Austin, Texas
    Posts
    1,166
    Wow, good luck on that! If you hit 3 GHz on that 1.6A, you'll be the leader of the mafia, cause you paid about $100-150 less and got the same speeds.

  11. #11
    counselor of clock Rasputin'sLiver's Avatar
    Join Date
    Jun 2002
    Location
    Cleveland
    Posts
    1,676
    Originally posted by Wallacebw
    on this note when I get my 2.26B which method should I use? (asuming that it needs it ) I already have a defoger kit and something like 250+ feet of monster cable...

    Either way work better? if not then which is easier...

    Brian
    I did the wire vid mod, but if you can get the defogger kit that seems to be an easier method. Both work equally well.

  12. #12
    Member micamica1217's Avatar
    Join Date
    Jun 2002
    Posts
    4,874
    Originally posted by Rasputin'sLiver


    I did the wire vid mod, but if you can get the defogger kit that seems to be an easier method. Both work equally well.
    I agree.

    I tryed two times to get the pin methed to work...still no good.

    I was like "this is just crazy,I have defogger kit from my amd days."

    first try worked...I got more than 2.0v at the ready.
    It was just too easy.

    mica
    Q6600 @ 3.0 (3.2 max OC), MSI P6N SLI plat, 4gigs corsair xms2, 2x 9800gtx KO in SLI, X-Fi XGamer, 2x Seagate Barracuda 250gb, Light-on 20x DVD, Thermaltake 750w PSU, air cooled with Ultama-90 and Antec 900 case....Soyo (24D6) 24" wide 14139 vantage

    " Comparing the technical relevance of The Inquirer to Beyond3D is like comparing the technical prowess of Paris Hilton to John Carmack." -Albuquerque


    [OCG] Fraging at it's finest.

  13. #13
    counselor of clock Rasputin'sLiver's Avatar
    Join Date
    Jun 2002
    Location
    Cleveland
    Posts
    1,676
    Originally posted by micamica1217


    I agree.

    I tryed two times to get the pin methed to work...still no good.

    I was like "this is just crazy,I have defogger kit from my amd days."

    first try worked...I got more than 2.0v at the ready.
    It was just too easy.

    mica
    mica, that wire trick was hard! It worked out for me after a couple of tries, but before I had those couple of tries I had a tough time roping the stupid pins with the wire and making it stay. Took over an hour to get it to work but it's working great now! I did the wire method because I had wire in the house and didn't have to mess with tracking down a defogger kit but it sure would have been easier with the defogger from what you're telling me.

  14. #14
    Member micamica1217's Avatar
    Join Date
    Jun 2002
    Posts
    4,874
    Originally posted by Rasputin'sLiver


    mica, that wire trick was hard! It worked out for me after a couple of tries, but before I had those couple of tries I had a tough time roping the stupid pins with the wire and making it stay. Took over an hour to get it to work but it's working great now! I did the wire method because I had wire in the house and didn't have to mess with tracking down a defogger kit but it sure would have been easier with the defogger from what you're telling me.
    hell, I never took the mobo out...and did not need laser eye surgery.

    mica
    Q6600 @ 3.0 (3.2 max OC), MSI P6N SLI plat, 4gigs corsair xms2, 2x 9800gtx KO in SLI, X-Fi XGamer, 2x Seagate Barracuda 250gb, Light-on 20x DVD, Thermaltake 750w PSU, air cooled with Ultama-90 and Antec 900 case....Soyo (24D6) 24" wide 14139 vantage

    " Comparing the technical relevance of The Inquirer to Beyond3D is like comparing the technical prowess of Paris Hilton to John Carmack." -Albuquerque


    [OCG] Fraging at it's finest.

  15. #15
    Member JudgeDredd's Avatar
    Join Date
    Apr 2002
    Location
    Austin, Texas
    Posts
    1,166
    Can someone explain this "defogger kit" please? I'm a little bit confused...

  16. #16
    Senior Member Maxvla's Avatar
    Join Date
    Jun 2002
    Location
    OKC
    Posts
    9,289
    Originally posted by JudgeDredd
    Wow, good luck on that! If you hit 3 GHz on that 1.6A, you'll be the leader of the mafia, cause you paid about $100-150 less and got the same speeds.
    on that note... has anyone ever gotten a 100% o/c on a 1.6a?
    The Black Hole
    Intel i7 860 2.8ghz
    Gigabyte P55M-UD2
    Mushkin 2x2GB DDR3 1600
    EVGA GTX460 1GB
    Intel X-25M 80GB SSD
    Magnetics - 2x2TB 4x1TB
    Corsair HX850W PSU
    NEC DVD-RW

  17. #17
    Member micamica1217's Avatar
    Join Date
    Jun 2002
    Posts
    4,874
    Originally posted by JudgeDredd
    Can someone explain this "defogger kit" please? I'm a little bit confused...
    used for a car...."rear window defogger repair kit".

    can be perchased at any auto supply store.

    look here

    hope this helps.

    micamica1217
    Q6600 @ 3.0 (3.2 max OC), MSI P6N SLI plat, 4gigs corsair xms2, 2x 9800gtx KO in SLI, X-Fi XGamer, 2x Seagate Barracuda 250gb, Light-on 20x DVD, Thermaltake 750w PSU, air cooled with Ultama-90 and Antec 900 case....Soyo (24D6) 24" wide 14139 vantage

    " Comparing the technical relevance of The Inquirer to Beyond3D is like comparing the technical prowess of Paris Hilton to John Carmack." -Albuquerque


    [OCG] Fraging at it's finest.

  18. #18
    Member JudgeDredd's Avatar
    Join Date
    Apr 2002
    Location
    Austin, Texas
    Posts
    1,166
    And it has something that lets you wire wrap easier?

  19. #19
    Member micamica1217's Avatar
    Join Date
    Jun 2002
    Posts
    4,874
    Originally posted by JudgeDredd
    And it has something that lets you wire wrap easier?
    well all I have to say is look up and hit the link.

    mica
    Q6600 @ 3.0 (3.2 max OC), MSI P6N SLI plat, 4gigs corsair xms2, 2x 9800gtx KO in SLI, X-Fi XGamer, 2x Seagate Barracuda 250gb, Light-on 20x DVD, Thermaltake 750w PSU, air cooled with Ultama-90 and Antec 900 case....Soyo (24D6) 24" wide 14139 vantage

    " Comparing the technical relevance of The Inquirer to Beyond3D is like comparing the technical prowess of Paris Hilton to John Carmack." -Albuquerque


    [OCG] Fraging at it's finest.

  20. #20
    Member Darryl_D's Avatar
    Join Date
    Apr 2002
    Posts
    918
    Quoted from Maxvla
    on that note... has anyone ever gotten a 100% o/c on a 1.6a?
    COURSE THEY HAVE!!! Before Rasputin's Liver (wtf man you need a new name) sold his 1.6a it was at 2.7ghz.... CS hawkeye had his chip up to 2.9 ghz at a point (i think...) currently on my 1.8a system i have it at 2.9ghz myself!

Page 1 of 4 1 2 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •