- Joined
- Jan 31, 2002
- Location
- North Carloina
Hi guys,
I didn't even know this board existed till I got to roaming around. I've been getting help from Sonny over on the Abit mobo page.
There are some awesome systems here!!!!
The whole idea for this came from the Tom's Hardware review of the Innovatek water cooling system. Only two companies sell the system and right now they are sold out of just about everything. I had to get the radiator from somewhere else but it is a little larger and has fittings for two 120mm fans. I used Panaflo fans and you can hardly hear them running. The flow meter thingy is seen by MBM5 as a fan and turns at at 3900 rpms. The pump is an Eheim 1046 and is rated at around 80gph. I use ShutDown NOW!! to shut it down if anything stops working. I got the relay switch from Swiftech so that the pump comes on when the computer is started. All the water stuff ran me around 350 not including the fans. The case is a Hon Hi and was 70 bucks.
It isn't overclocked and won't even hit it's rated speed 1400(133) It is running now at the setting >1300(100). I can't get it to do anything in the 133 FSB. That is what Sonny is helping me with.
Temps are 86 Idle and 93 playing SOF2 online.
Here is a pic of it I posted on the Abit mobo site.
http://forum.oc-forums.com/vb/showthread.php?s=&threadid=117158
Here are a couple of the sites that sell and review the stuff.
Mobo: Abit KT7A
CPU: Athlon 1.4
http://www.highspeedpc.com/Merchant...egory_Code=Kits
http://www6.tomshardware.com/howto/...0701/index.html
I didn't even know this board existed till I got to roaming around. I've been getting help from Sonny over on the Abit mobo page.
There are some awesome systems here!!!!
The whole idea for this came from the Tom's Hardware review of the Innovatek water cooling system. Only two companies sell the system and right now they are sold out of just about everything. I had to get the radiator from somewhere else but it is a little larger and has fittings for two 120mm fans. I used Panaflo fans and you can hardly hear them running. The flow meter thingy is seen by MBM5 as a fan and turns at at 3900 rpms. The pump is an Eheim 1046 and is rated at around 80gph. I use ShutDown NOW!! to shut it down if anything stops working. I got the relay switch from Swiftech so that the pump comes on when the computer is started. All the water stuff ran me around 350 not including the fans. The case is a Hon Hi and was 70 bucks.
It isn't overclocked and won't even hit it's rated speed 1400(133) It is running now at the setting >1300(100). I can't get it to do anything in the 133 FSB. That is what Sonny is helping me with.
Temps are 86 Idle and 93 playing SOF2 online.
Here is a pic of it I posted on the Abit mobo site.
http://forum.oc-forums.com/vb/showthread.php?s=&threadid=117158
Here are a couple of the sites that sell and review the stuff.
Mobo: Abit KT7A
CPU: Athlon 1.4
http://www.highspeedpc.com/Merchant...egory_Code=Kits
http://www6.tomshardware.com/howto/...0701/index.html
Last edited: