Results 1 to 7 of 7
  1. #1
    The devilís advocate pacino's Avatar
    Join Date
    Dec 2001
    Location
    Where the hottest chicks reside!

    Errr! no choice but P4T533, or -C! .. read more..

    Well, could not wait anymore, needed a C1 chip, no smell of any P4's @ my house and I could not wait anymore, so I bought 2.8 today, she's into my BD7II PC3000 Corsair Cas 2 doing 3.29Ghz with just 1.6v on air & 3:4 CPU/Mem ratio, pretty neat! but but but, I'm greedy! hehe. I'm about to go RDRAM, PC1066's in hand, but got no choice on Mobos!!! P4T533 is crap from tons of reviews and P4T533-C seems to be the only option for me but I think I'll be stuck @ 150~156FSB! so I'm not going to go anywhere.. with my current setup, I did boot into windows @ 3.4Ghz (160FSB) 1:1 ratio, but blue screens after an hour or 2. I think I need more juice, so I need some inputs here:
    1. Stick to my setup, or pro'lly get 3200 DDr's, and wire wrap her.
    2. Go P4T533 or -C and stick @ 150fsb.

  2. #2
    Member jdmcnudgent's Avatar
    Join Date
    Jan 2002
    Location
    tOLEDO, OHIO, the heart of it all!
    my p4t533 has been running flawlessly for over 48 hrs with no reboots. i am so happy. i am going to mod the vrimm voltage sometime this week so i can see if i may do 160x4.

  3. #3
    Member jdmcnudgent's Avatar
    Join Date
    Jan 2002
    Location
    tOLEDO, OHIO, the heart of it all!
    also, i would wait for the dual channel ddr boards or wait for the epox 232 pin RDRAM mobo.

  4. #4
    The devilís advocate pacino's Avatar
    Join Date
    Dec 2001
    Location
    Where the hottest chicks reside!
    hrm, ok I think I'll wait, I'll just try to play around with this setup and see if I can get any higher, I'll try wire wrap her tomorrow or somethin' ..

  5. #5
    Member FIZZ3's Avatar
    Join Date
    Jun 2002
    Location
    NL, Europe
    I'm happy with my P4T533 as well. Can't beat RDRAM performance either...
    Desktop:
    Intel C2D E6700 @ 2.67Ghz / TR AXP-140 | Asus P5W DH Dlx | Corsair TwinX 4Gb PC6400 CL4
    Nvidia 8800 GTS 640Mb / TR HR-03 | Creative X-Fi
    2x WD Raptor 150Gb | Plextor PX-760SA
    Lian Li V2000 Plus | Corsair HX620
    Dell 2407WFP | Logitech Z-5500

    Laptop: Sony VAIO Z11
    Intel i5-520M | 4Gb | Nvidia GT330M | 2x64Gb RAID-0 SSD | 13" 1600x900 panel

  6. #6
    Member markodude's Avatar
    Join Date
    Jul 2002
    Location
    Europe
    Fairly happy with my P4T but would suggest waiting for the Epox board too , especially if the 8k3a is anything to go by....really depends on the quality of RIMM4200 modules fitted though. AS it stands there are more high performance DDR chips out there than 32-bit RDRAM chips.....
    I hate the UK, cant find a C1 stepping anywhere - if I did find one I would go the 2.5 route though, far cheaper and potentially same max clock speed.

    Main rig - E5-2697v2 12-Core, P9X79-PRO, 16GB Hyper-X 1866, Custom H20 on CPU, Dual Gigabyte 7990s, Intel S3700 SSD 800GB x2, 2TB WD HDD

  7. #7
    The devilís advocate pacino's Avatar
    Join Date
    Dec 2001
    Location
    Where the hottest chicks reside!
    I just changed my mind, I don't think I can wait, starring @ this baby for an hour now and decided to go grap PC4200 RD's & P4T533 .. worst case senario, I'll run it @ 3.2Ghz for everyday usage.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •