Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Aug 2002
    Location
    Orlando
    Posts
    157

    Powersupplies for Pelts

    Would any of thse PSu's work with a pelt?


    http://www.mpja.com/list.asp?dept=3
    NF7-S Rev2
    1700XP DLT
    512 Generic PC3500
    9800NP
    SwiftechMCW
    2 X 40 Maxtor
    AntecTruePower 430
    WinXP

  2. #2
    Member Ct. Strangelove's Avatar
    Join Date
    Aug 2002
    Location
    bleek abyss
    Posts
    656
    What rating of a pelt? You can take two of the 12v @ 12.5 A and hookum together and get a good PSU for a 226w pelt.
    make a nice plexi or wood case for them with a single 60mm fan. put a few neons in the case. (plexi) that will be one pimpin pelt psu and at a decent price.

  3. #3
    Member
    Join Date
    Jul 2002
    Location
    Indiana
    Posts
    1,517
    Originally posted by Ct. Strangelove
    You can take two of the 12v @ 12.5 A and hookum together and get a good PSU for a 226w pelt.
    Yes, you could hook two of those supplies up in parallel, and if you know what the issues are, and you address them it can work.

    However, if you don't know what you are doing, you are likely to end up with two dead power supplies and a dead CPU.

    If you want to know some of the issues involved see this thread.

    You can find a good pelt supply here. There is a review of the supply which also gives handy tips for using it here.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •