Results 1 to 3 of 3
09-29-02, 06:43 PM #1
How do i know when i Have unlocked my Xp anthlon?
Im going to be unlocking my chip soon. how can i tell when im successfull when i can lower the multiplier? Oh yeah i always hear you guys talking about ram timings? like that 2:3:3 whatever stuff is this in the bios? and what would be good ram timings for a 640mb of 2100 ram (1800+) Vcore set at 1.85 Thanks
09-29-02, 06:49 PM #2
you will know that you can lower the mult by trying to lower it in bios and seeing that it works by using wcpuid.
as for ram timings you are talkin about i think you are a bit confused
the numbers like 5:2:1 are the pci divisors which tell what speed the pci cards are being divided by when overclocked.
the fastest ram timings are 2-4bank-2-5-2-2-1t command. there are numerous options in the ram segment in bios and if you set it to those your ram will run the fastest. since you have 2100ram make sure you increase the ram voltage when overclocking from 2.5v to atleast 2.7Barton 2600m AQYHA 0346 XPMW Y @ 2640mhz 1.9v
2x256 Twinmos BH5
Geforce FX 5900XT
09-30-02, 06:18 PM #3
Thanks that helped a lot