Results 1 to 6 of 6

Thread: failed unlock

  1. #1
    Member
    Join Date
    Sep 2002
    Location
    London, UK
    Posts
    400

    failed unlock

    u was unlocking my xp1600+ AGOIA0213Y (green)
    first two tries no luck multipliers wont work unless in default, then i tried scraping the contacts to try and remove the thin layer which prevents unlocking, i accidently scraped down to the layer underneath the green. Well it still works, but not when i try to unlock it, any ideas on how i can get this chip unlocked plz, i heard u can connect some of the pins on the back to unlock that may be my only hipe.

  2. #2
    Member maxima88's Avatar
    Join Date
    Jan 2002
    Location
    Delaware
    Posts
    3,164
    The unlock method you mentioned by connecting pins at the back is for the Tbred. That's where you use a piece of wire to connect the pins.

    The only way I know on how to unlock a pally is by filling in the pits and connecting the bridges w/ conductive paint.
    Athlon II Phenom Deneb II X4 B45 @ 3.906ghz 252X15.5
    Asus M4N98TD Evo
    G.Skill 2x2GB DDR3 1600
    Thermaltake 650W PSU
    2x9600gt SLI
    2x320GB WD SATA 7200rpm
    Zalman 9500A LED Cooler


    MOBILE 2500XP BARTON @ 2656mhz 221x12 + ABIT NF7-S
    1GB PC3500C2PT Corsair/Antec True Power 480W PSU
    ASUS GeForce4 Ti4800 128MB 341/741
    Thermalright SLK-900 w/ 92mm Tornado

  3. #3
    Member
    Join Date
    Sep 2002
    Location
    London, UK
    Posts
    400
    has anyone else had any trouble like this?
    isnt there something else i have to do to unlock the green chips i heard there is for the 2100+ (green) but i dont know about the 1600+
    i know a lot of people have had trouble with the green cpus and unlocking if so please post your problems here

  4. #4
    Member Robin Hood's Avatar
    Join Date
    Aug 2002
    Location
    Nottingham
    Posts
    466
    Yeh - I had the same as you and uncovered the metal below. Tried covering it all with nail varnish and unpick the terminals but to no avail. I back to being locked again.

    I'm just going to live with it until Bartons are cheep. Unless I find a Tbred in my wife's stockings this christmas.

  5. #5
    Member maxima88's Avatar
    Join Date
    Jan 2002
    Location
    Delaware
    Posts
    3,164
    Originally posted by Robin Hood

    I'm just going to live with it until Bartons are cheep. Unless I find a Tbred in my wife's stockings this christmas.
    I hope she's still not wearing those stockings when you find it. j/k

    I'm holding out for the Rev B chips myself.
    Athlon II Phenom Deneb II X4 B45 @ 3.906ghz 252X15.5
    Asus M4N98TD Evo
    G.Skill 2x2GB DDR3 1600
    Thermaltake 650W PSU
    2x9600gt SLI
    2x320GB WD SATA 7200rpm
    Zalman 9500A LED Cooler


    MOBILE 2500XP BARTON @ 2656mhz 221x12 + ABIT NF7-S
    1GB PC3500C2PT Corsair/Antec True Power 480W PSU
    ASUS GeForce4 Ti4800 128MB 341/741
    Thermalright SLK-900 w/ 92mm Tornado

  6. #6
    Member Robin Hood's Avatar
    Join Date
    Aug 2002
    Location
    Nottingham
    Posts
    466
    Originally posted by maxima88
    I hope she's still not wearing those stockings when you find it. j/k
    Oh - I don't know

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •