Hi I currently have a MSI KT4V-L board and it is acting very quirky with my new XP2100 AUIHB Tbred B CPU. First off all this chip is unlocked but when I change the multiplier up or down it won't post. The max Vcore I can give the chip is only 1.7v because of the 0.1 bios limit on Vcore with Tbreds. I know hitting 200 FSB would be impossible on this board even if I could lower the multiplier to do so because of the PCI/AGP stress. Right now I am running my XP2100 TBred B AUIHB 0302 CPU at 167.5 X13 = 2178Mhz at 1.7v. That is about all she has in this setup because I can't give it more Vcore etc. I am really ****ed off that I can't change the multiplier on this board. Has anyone experienced this with Tbred on the MSI boards? Is there a hacked bios I could use that fixes this multiplier problem. The bios shows multipliers from 5X to 15X but like I said any multiplier above or below the 13X Default will not post. Other then this multipler problem this board has been ROCK stable for me for only $80. Now on to the Epox 8RDA board. Will the Epox 8RDA give me all multpliers unlocked with my XP2100 TBred B 0302 CPU without any modifications to any bridges on the CPU? Will the 8RDA board give me VCore options up to its max VCore setting available(1.85v?)with this Tbred B cpu without having to mess with the L11 bridges on the CPU, or does it also have the 0.1 Vcore limitation in BIOS like my MSI board? The 8RDA has the PCI/AGP lock right so no matter what FSB speeds the PCI/AGP bus is not effected? My main goal if I get this 8RDA is to be able to get at least 200FSB without any kind of modifications to CPUs and the board etc. I have excellent Case cooling that keeps my case temp around 26C-28C so that should help some of the chipset heat issues. Please if you can answer any of my million questions please do, because if this board can do all that I will upgrade to it and retire the MSI KT400.