Results 1 to 12 of 12
Thread: p4 2.4 C
07-18-03, 05:06 AM #1
p4 2.4 C
I have read/heard that the p4 2.4 with H/t is very good for overclocking upto 3.6ghz is this true has anyone tried it out and if so how did you do? Any response would be appriciated. Thanks
07-18-03, 05:11 AM #2
Welcome to the Forums
See this thread for more info
In short, yes the 2.4c rocks and yes the average overclock is between 3.2 and 3.4ghz - even if you get to 3.2/1066/DDR424 this makes it faster than any production intel system.
Main rig - E5-2697v2 12-Core, P9X79-PRO, 16GB Hyper-X 1866, Custom H20 on CPU, Dual Gigabyte 7990s, Intel S3700 SSD 800GB x2, 2TB WD HDD
07-18-03, 12:15 PM #3
There are folks reaching 3.6 gig with the 2.4C, but that's not typical. The average seems to be more in the 3.2 to 3.4 gig ball park like Mark said.2600K, Asus P8P67 Deluxe, 2X2GB G.Skill Pi PC3-2133, PC & Cooling 750W
watercooled: Eheim 1048 pump, Swiftech Apogee GTX and 2X120mm rad
FS020 case, OCZ SSD, Sapphire HD 6950, Acer X241W 24" widescreen
07-18-03, 12:41 PM #4
I got 3.4 with mine so I'm a believer !!New Rig
AMD Phenom II BE 1090T w coolermaster v8 HSF
Mushkin (2 x 2GB) DDR 3 1600 7 7 6 18
2 x Radeon HD4890 (Crossfire)
2 x WD 640 Caviar Black in Raid 0
HAF 932 Case w Corsair HX 850 Watt PSU
07-18-03, 02:00 PM #5
3.4 with mine.
07-18-03, 02:07 PM #6
- Join Date
- May 2003
Ive hit 3.5-3.6 with mine using retail cooling.
07-18-03, 02:21 PM #7
What dividers are you using?
-BobbyAsus Z87-A | Intel i5 4670k @ 4.0ghz | CM Hyper 212 Evo | Corsair vx550w
4 x 4gb Kingston HyperX | Asus HD6950 DCUII 2gb | Asus 27" Widescreen | MS Windows 7 Ultimate
2 x 128gb OCZ Agility3 SSD Raid0 | 2TB Seagate | 1TB Seagate | LiteOn DVD 16x | Toshiba 16x/48x DVD
Corsair 300r | LogiTech Z-640 | LogiTech G700s |
07-18-03, 08:52 PM #8
07-19-03, 02:04 AM #9
- Join Date
- Nov 2002
Ive got mine at 3.0 ghz.. Im using stock cooling and I know I can go higher but Im very happy at this speed.. Maybe when I get my new hsf Ill push it to 3.2..
07-19-03, 03:32 AM #10
oh yes, I got a 2.6c today and I will immediately exchange it for a 2.4. These chips all overclock to the same speed on average, due to the multiplier, and if you are going to overclock then you might as well do with a higher fsb. I guess a lower multiplier is your friend in an instance like this, all you need is the proper mobo to drive up the fsb and you are in business. Keep the voltage down, I don't care what anyone says. Be polite to your chips. I started with a 3.0 and overclocked it to about 3.2 ghz stable. Now I have this 2.6 and it seems to go to 3.2 ghz stable. I guess the 2.4 might do the same and with a mad fsb!
As my friend Jesse just said to me via IM, "yeah 2.4 is for the enthusiast."
Moreover, I am going to Fry's to buy this chip OEM and will repeatedly make them go and bring another chip to me until it says in beautiful letters "malay" on it.
07-19-03, 10:22 AM #11
3.2 - 3.4 sounds right, i'm 3.3 . just make sure you have some decent cooling SLK, Zalman 7000cu or even better...water. i've got the zalman and my temps are perfect 51 under 100% load.
tag some good memory and viola, you'll have a fast system.
forgot to add, disable last 2 options under game accelerator (bios 1.4 or later), put your mem at 2.8v and you may have to (likely will) have to add more voltage to your cpu. i'm prime stable for 13 hours and counting at 1.7v but at 1.65 if bombs out after 8. most people are getting high clocks with 1.55-1.6v though. this is where that cooling helps. and go 3:2 ratio to find your cpu limit, some are 3.0, most are 3.3 (275fsb seems to be a wall) and a few are like you said 3.6ish!
07-22-03, 02:59 AM #12
Thanks to all who replied its helped a great deal.