Results 1 to 9 of 9
Thread: OCing P/// 1ghz
10-25-03, 03:26 AM #1
OCing P/// 1ghz
Hi to all!
I have an ASUS CUV4X-E mobo @ 133FSB and 7.5 Multiplayer.
I have 1Ghz Intel CPU.
I hared u cant change the intels multiplayer, but intell sais u can, so i am confused...
Well my question is, Can i overclock it?
If yes, how (what will be the fsb,multiplayer) ?
Thanks, for all of u...
Hey, i really need it overclocked soon if iits posible...
Last edited by glebka11; 10-25-03 at 04:00 AM.
10-25-03, 05:05 AM #2
just up the fsb abit at a time and then if it becomes unstable up the vcore if the temps are below 50C use prime95 to stess test it to make sure its stableAMD Athlon 64 3200+ Winchester @ 250x10 = 2.5ghz 1.55V Cooled By XP-120 & YS-TECH FD1238 Fan
MSI K8N Neo2 Platinum Edition
Corsair XMS TwinX 1Gig 2x512Meg PC4400 Ram @ 416Mhz 2,2,2,6 1T
Hercules 3D Prophet 9700NP 128Meg ( Bios Flashed To 9700Pro With VGA Sliencer )
480Gig Hard Drive Space
MSI 16x DVD Drive
Artec 52x CD-RW Drive
Creative SoundBlaster Audigy 2 ZS
Antec PlusView 1000AMG Metallic Gray Case
Antec TruePower 550watt PSU ( New Version )
Windows XP Pro SP1
4.9GHZ Of AMD Power For Overclockers.com Boinc Seti Team.
10-25-03, 05:36 AM #3
well, i tryed to change the fsb in the bios but it doesnt let me.
what to do?
maybe its the jumpers?
10-25-03, 10:19 AM #4
You overclock that motherboard in the CPU menu of the BIOS. You generally cycle through the clock settings until you find "user define" then that allows access to the FSB (system frequency). You probably won't get a lot out of your system, the P-III 1000 is not a good overclocker since it's already using 133 FSB and it's getting close to the limit for the core anyway. But. you should still squeeze a little out of it. Overclocked Coppermine CPUs will get unstable if the temps get into the mid-40's.2600K, Asus P8P67 Deluxe, 2X2GB G.Skill Pi PC3-2133, PC & Cooling 750W
watercooled: Eheim 1048 pump, Swiftech Apogee GTX and 2X120mm rad
FS020 case, OCZ SSD, Sapphire HD 6950, Acer X241W 24" widescreen
10-25-03, 10:59 AM #5
Make sure you have JumperFree Mode enabled in the motherboard. Check your manual, but I think you have to turn all of your dipswitches off and move the JEN jumper. At least, that's how it is on my CUSL2-C. If I remember correctly, the CUV-4X is the same way.
10-25-03, 02:33 PM #6
thanks, what about multiplayer, can i change it too?
10-25-03, 05:41 PM #7
thanks for all!
btw is it true that i cant change the multiplayer?
one more thing, can i burn up my system when i overclock it (this perticulary)?
what to do if my temp avg is 46C (111F) ?
10-25-03, 05:48 PM #8
The average temp is of no importance, you gotta record the average temp when the CPU is at full load by Prime95 or at least Folding at home"<The_Coolest> You can't unwaste wasted CPU cycles" - Start FOLDing now!
Core i7 2600K 3.4GHz @ 4.5GHz (Scythe Mugen2) / Mobo: Biostar TP67XE / SSD: Crucial M4 128GB (+ HDDs) / GPU: HD5450 or 8800 Ultra / Mem: 4x4GB DDR3-1600 G.Skill 4GBXL RipJaws X - 16GB total / PSU: Seasonic S12II 620W.
Core i3 540 3.06GHz @ Stock / Mobo: MSI H55M-ED55 / GPU: Integrated / Mem: 2x2GB DDR3-1600 G.Skill 4GBRL RipJaws - 4GB total / PSU: FSP ATX350-PNR 350W.
Core Temp - Accurate temperature monitor for Intel's Core/Core 2 and AMD64 processors
10-25-03, 07:10 PM #9Originally posted by The Coolest
The average temp is of no importance, you gotta record the average temp when the CPU is at full load by Prime95 or at least Folding at home. 3570k / 7970 / 16gb .