Results 1 to 8 of 8

Thread: fsb oc!

  1. #1
    Disabled
    Join Date
    Nov 2003
    Location
    California
    Posts
    103

    fsb oc!

    im oveclocking my computer right now im at 176fsb and 6.5 multy
    as i go higher with the fsb im oc my mem so if my sys becomes unstable i have to raise the mem core voltage right? since the cpu i way below stock and not ocing it yet.
    i only have to raise the v core when i start upping the multy and it becomes unstable right???

    am i right??

    thanks all !!!

  2. #2
    Glorious Leader I.M.O.G.'s Avatar
    Join Date
    Nov 2002
    Location
    Rootstown, OH
    Posts
    25,172
    Basically you got it... What are your system specs?

    Raising the vcore can help you reach higher FSB's also.

    As you hit walls, bumping up the vcore might help you pass them, but make sure your temps are alright and you aren't giving anything too much voltage.
    The OC Forums Way
    We are a team. We are a community. We are a fellowship made strong by mutual respect and shared dedication to the task of enriching all who come here.
    The OC Forums Thank You Thread
    Put your computer to work for our OC Forum Teams!
    Try out our POST TEMPLATES, they save you time answering common questions!

    I spend half my money on CPUs, GPUs, and Liquid Nitrogen. The other half I waste.

  3. #3
    Disabled
    Join Date
    Nov 2003
    Location
    California
    Posts
    103
    abit nf7-s rev 2.0 2-256mb twni x coarsair pc 3200LL mem
    1700tbred b 319. slk-800 u tornado fan with speed control.
    9700 pro with Tt giant on it. forton 350w psu w 120mm fan.4 case fans WD 80 gig 8mb. Antec plus view 1000 amg grey case.

    im at 176 fsb 6.5 multy 6/6 divider i had to raise the mem core to 2.7v
    temps on load running prime 95 with the fan running on the lowest speed is 34c full speed is 31c (talking about the tornado cpu fan)

    what do u think??

  4. #4
    Premium Member #10
    clash's Avatar
    Join Date
    Dec 2002
    Location
    Canyon,Tx.
    Posts
    991
    Nice looking system, it should have much more in it than where you are now. What is your voltage now?
    i7 2600k @ 4.5
    ASRock Z77 Extreme4
    Corsair Vengeance 4x8
    Mushkin Chronos 120
    XFX 7950 BE 1050/1500
    Rosewill Lightning-1000 PSU

  5. #5
    Disabled
    Join Date
    Nov 2003
    Location
    California
    Posts
    103
    oh no!

    iam just testing it will go over 2.4 ghz and at least 210fsb i just started ocing 2 days ago i just running prime to make sure that it is stable at every settings

  6. #6
    Member 7keys's Avatar
    Join Date
    Dec 2001
    Location
    Montreal
    Posts
    1,269
    Originally posted by Gabrielsurf
    abit nf7-s rev 2.0
    im at 176 fsb 6.5 multy 6/6 divider i had to raise the mem core to 2.7v


    what do u think??
    divider???

  7. #7
    Disabled
    Join Date
    Nov 2003
    Location
    California
    Posts
    103
    i have it on 6/6 right now is it bad should i go lower it?

  8. #8
    Glorious Leader I.M.O.G.'s Avatar
    Join Date
    Nov 2002
    Location
    Rootstown, OH
    Posts
    25,172
    6/6=1

    I don't think that was what you meant gabriel - did you mean 1/6?
    The OC Forums Way
    We are a team. We are a community. We are a fellowship made strong by mutual respect and shared dedication to the task of enriching all who come here.
    The OC Forums Thank You Thread
    Put your computer to work for our OC Forum Teams!
    Try out our POST TEMPLATES, they save you time answering common questions!

    I spend half my money on CPUs, GPUs, and Liquid Nitrogen. The other half I waste.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •