Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    Nov 2003
    Location
    Hong Kong
    Posts
    17

    Burn in question

    I've just get a new 2500+ and it works very well at 200 X 11 w/ 1.675V. It is suggested that a burn in for a new CPU will unlock the maximum poteneial. Do I actually need a burn in for my new 2500+, does it help further improve the performance (say further reduce the Vcore for 200 X 11)

    Thanks for all first.

  2. #2
    Member
    Join Date
    Jul 2003
    Location
    moved
    Posts
    937
    not at all, if you're satisfied with the results so far, just leave it be

    burn in's are more useful for helping the thermal paste settle, rather than helping lower the voltage

    hope this helps

  3. #3
    Bon3thugz43v3r's Avatar
    Join Date
    Oct 2002
    Location
    The Sunshine State
    Posts
    1,782

    Re: Burn in question

    Originally posted by unclecheong
    I've just get a new 2500+ and it works very well at 200 X 11 w/ 1.675V. It is suggested that a burn in for a new CPU will unlock the maximum poteneial. Do I actually need a burn in for my new 2500+, does it help further improve the performance (say further reduce the Vcore for 200 X 11)

    Thanks for all first.
    Refer to my post towards the bottom of this thread.
    http://forum.oc-forums.com/vb/showth...hreadid=251324
    i7-4770k @ 4.2Ghz
    16GB G.Skill DDR3 2666
    Asus Maximus Hero VI Z87
    MSI N770 TF 2GD5/OC
    Corsair HX750 PSU
    Corsair H100i
    Corsair Force GT 240GB SSD

    My Heatware

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •