Results 1 to 3 of 3
  1. #1

    Water coolin my GPU Finally ^^

    i finally took the time and ordered a dangerden maze4 GPU block and so far i love it!

    my setup is rez > pump > rad > cpu > gpu

    and the cpu temp has only risen slightly.

    my old idle/load temps were 40-41/48-49 now they are 44-46/49-51.

    i have to say that i am impressed with my setups performance.

    at stock cooling my redeon core OC was around 405-410 with minimum artifacts, now its up to 430 with ever fewer barely noticible artifacts. (a couple white dots here and there every once in a while)
    Main Rig:
    Asus Crosshair Formula II
    AMD Phenom 9850 2.5GHz Quad Core(---x-=---mhz)
    2x PNY 9800 GX2 Quad SLI 1GB 512bit(---x-=---mhz)
    2x 2GB OCZ Platinum DDR2 1066 (PC2 8500)
    2x 250GB Barracuda 7200.10 3gb/s HDD
    ZALMAN ZM850-HP 850W Continuous / 1050W Peak PSU

  2. #2
    Member solo's Avatar
    Join Date
    Apr 2003
    nice, but your overclock seems a little bit low

    mine on air can do 460/410 with no artifacts
    but i slapped an AMD CPU hsf and have vmods, but that is ok

    go get a vmod and bump that core higher

    great job on the wc job tho
    rar

  3. #3
    how exactly do i go about finding a vmod for my card? in my NT7 r2 bios settings there is an option for some sort of similar option.
    Main Rig:
    Asus Crosshair Formula II
    AMD Phenom 9850 2.5GHz Quad Core(---x-=---mhz)
    2x PNY 9800 GX2 Quad SLI 1GB 512bit(---x-=---mhz)
    2x 2GB OCZ Platinum DDR2 1066 (PC2 8500)
    2x 250GB Barracuda 7200.10 3gb/s HDD
    ZALMAN ZM850-HP 850W Continuous / 1050W Peak PSU

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •