- Joined
- Jul 31, 2001
hello,
i have an abit kt7 motherboard running a thunderbird at 1300 or so (don't have my waterblock back yet)
when i use the via hardware monitor that came with the motherboard, i notice most of the voltage readings are normal but the 12v usually says something like 15.2, way higher than it should be. the 5v usually is right around 4.9 or so. and the cpu voltage is always a little bit higher than i set it in the bios (ie 1.82 when i set it to 1.75, which is actually kind of nice that i can go up higher w/o voltage modding). does anyone have any ideas as to why this is? maybe i have something set up wrong. i just dont' want to screw up my hard drives and stuff so i thought i would ask. is it jsut a problem with my power supply. its a 300w antec.
thanks,
orange
i have an abit kt7 motherboard running a thunderbird at 1300 or so (don't have my waterblock back yet)
when i use the via hardware monitor that came with the motherboard, i notice most of the voltage readings are normal but the 12v usually says something like 15.2, way higher than it should be. the 5v usually is right around 4.9 or so. and the cpu voltage is always a little bit higher than i set it in the bios (ie 1.82 when i set it to 1.75, which is actually kind of nice that i can go up higher w/o voltage modding). does anyone have any ideas as to why this is? maybe i have something set up wrong. i just dont' want to screw up my hard drives and stuff so i thought i would ask. is it jsut a problem with my power supply. its a 300w antec.
thanks,
orange