cant achieve high fsp

N3M3SiS · May 24, 2004

hi , i got an nf7-s mobo with an mobile 2600 and 1 gb of mushkin lvl2 pc3500 (bh5) , it seem i cant get anything stable over 200 fsb , i tried the l12 mod, it didnt change anything at all , i am wondering if its the mobo that is holding me back , or is there any mod that is recommended for nf7-s board , atm i am at 200 x 13 which aint to bad but a higher fsb would be nice .

maxima88 · May 24, 2004

Are you sure your l12 mod worked?

What voltage are you feeding your RAM?

N3M3SiS · May 24, 2004

l12 mod seemed to have worked, when i set it to optimized default it set to 200 x 5 so it look like it worked, and i got max volt to the ram which is 2.9 on the nf7-s mobo.

juliendogg · May 24, 2004

how about chipset voltage ?

Suma · May 24, 2004

Try using lower VDDs.
It seems that mine loves 1.5vdd not higher, not lower.

N3M3SiS · May 24, 2004

my chipset is set to 1.7 volt.

fsarfino · May 25, 2004

Try setting your "Cpu FSB/dram ratio" to 6/6 to make the cpu and ram on a 1:1 basis. I had the same problem you are describing when I had mine set to auto

N3M3SiS · May 28, 2004

that didnt help either ;(

cant achieve high fsp

N3M3SiS

Registered

maxima88

Member

N3M3SiS

Registered

juliendogg

Member

Suma

Member

N3M3SiS

Registered

fsarfino

Member

N3M3SiS

Registered

Similar threads