Results 1 to 7 of 7
Thread: Dumb noob questions sorry...
06-03-04, 12:46 AM #1
Dumb noob questions sorry...
My main question I looked all over the place and couldn't find an answer so,
I just bought a thermalright 947u heatsink and a 92mm fan for it, i was looking at the installation guide on thermalright's website and it said to "face fan forward cpu", not really the best english, so is the fan supposed to blow into the heatsink?
While I'm bothering you, wondered is it that hard to use artic silver thermal paste, if I haven't done it before should I just use the artic ceramique stuff?
I'm not really looking to do to heavy of overclocking just move a 2500+ xp-m up to like 2.2ghz.
oh yeah, one final thing, my case has fans on front, rear, side panel and on the top panel, should i do front & side as intake and top & rear as exhaust, or what would be best?
06-03-04, 12:53 AM #2
welcome to the forums!
you're right, the fan is supposed to blow air down onto the heatsink.
arctic silver 5 is pretty easy to use and i would highly recommend it. there are detailed instructions and pictures on their website:
the fan setup you mentioned is exactly right.
good luck and if you have any other questions feel free to ask
06-03-04, 01:12 AM #3
Thanks for the help.
I was worried bout the AS5 because I've seen people mentioning that you could short your cpu with it, and that would completely ruin my day.
06-03-04, 01:28 AM #4Originally Posted by BadDubbinIntel Core 2 Duo E8400 Wolfdale 3.0Ghz
Gigabyte GA-X38-DS4 Motherboard
MSI Radeon HD 3870 512MB
G.Skill 8GB DDR2 (PC2 6400) 5-5-5-15
2x500GB WD Caviar SE16 7200RPM SATA HD (RAID 1)
Windows Vista 64-Bit Home Premium
06-03-04, 01:29 AM #5
are you planning on using amd or intel?
shorting out an intel now would be damn near impossible with the heatspeader they use
if you follow the instructions and use a very very thin layer (on the AMD core) you will be fine.
06-03-04, 01:48 AM #6
amd xp-m 2500, , just gotta be careful not to get it on anything but the core
06-03-04, 06:28 AM #7
WELCOME TO THE FORUMS For more air flow with less noise, remove the fan grids from the case if you haven't already. Wires and cables out of air paths help with air flow also..Keep your flow up & temps down.MOBYDICK
Intel-2.4c-HT @ 2.9 *SP-94 w/ Delta 92mm HHE w/25mm spacer *FIC-865PE-Max
OCZ 2x512 EL Gold PC 4000 @ 1:1 *2.5/4/4/7 *BFG Geforce 7800 GS OC
80g.Maxtor PATA and SATA *Xaser III. v1000D modified
FULL LOAD Temp 36°C / Syst. temp 23°C /Ambient 20°C (room temp)
F@H TEAM 32 :thup: