Results 1 to 6 of 6
07-16-04, 09:28 PM #1
2500+ is reading 1100 mhz at start up...
can anyone tell me why this is? and what I can do to fix it. Thanks.
07-16-04, 09:34 PM #2
is this the first time running the cpu? If so you have to go into bios and set up the cpu..... let me know where you are in the process....CM-690 | Maximus Formula | Ballistix D9GMH 2GB - 4-4-4-10 - 2.2v (active cooled) | E6850 @4GHz (L719B) 602 Bios 500x8 - 1.475v | Ultra 120 Extreme | 2x HD3870 840/1300 | Lite-On 52327s CDRW | WD 74GB - Raptor HDD | Corsair 620HX PSU | Windows XP Pro sp2 |
Support the OC Benchmarking Team The HD 4870/50 Thread The HD 3870/50 Thread The X1900XT/XTX Thread X800GTO˛ Thread Heatware
Make friends with your "FAST" - 90K 01SE - 77K 03 - 29K 05 - 19K 06 - 274K AM3 - single card all air baby!
07-16-04, 09:34 PM #3
It probably has something to do with resetting the CMOS, it resets the FSB to 100, and the multiplier on the barton = 11
07-16-04, 09:42 PM #4
Set your FSB to 166.DFI LanParty NFII
Athlon XPM 2600+ IQYHA 0401 @ 2500mhz 12.5x200fsb 1.65v Homemade 240mmx120mm HC WC setup w/ Y S Tech 105cfm + Via Aqua 1300
1g (2x512) BH-5 Buffalo PC3700 @ 200 fsb 2-2-2-11 2.9v
BBATi Radeon x800 Pro VIVO 1.6ns
480GB on 5 drives, 52x24x52 Lite-On
500w Raidmax, Sound Blaster Audigy MP-3+
Folding for team 32 TOP 30 26.7 ghz of Borged powah :D Heatware
07-16-04, 09:53 PM #5
this is the first time to use the chip. It was set at 166 X 11 in bios, but at the top reads xp 1100 mzh. Also when starting up it says CPU unworkable or has been changed - Check soft menu...
07-16-04, 10:29 PM #6
I changed it to user defined in bios and then saved. I restarted and changed it back to 2500+ and it reads it as 1.83 now. cool