Results 1 to 3 of 3
  1. #1
    New Member
    Join Date
    Jul 2004

    Barton 3000+ 400FSB Heat ?

    Hi All, I am very new to all this overclocking stuff and have simple question for you senior clockers out there.
    I am running a XP 3000+ Barton 400FSB CPU on a ASUS A7n8X-E Deluxe MB my stock settings are 200@10.5 1.650v all runs well at 2100 temps around 50-51C
    I then overclock to 200@11.5 1.750v and my temps go up to 54C steadily, what would be too hot and the temp to begin to worry at?

  2. #2
    Join Date
    Aug 2004
    Start worrring when the temps reach 60 c.

  3. #3
    Member Jess1313's Avatar
    Join Date
    Feb 2004
    The DFI AMD Forum......
    At vcore's above stock, i would try my best to keep it to a max of 55c, CPU's become more sensitive to tempature, at higher vcore's.

    (its my personal preference to keep mine below 52c maxload, but i run vcore up closer to 2.0v, and at that vcore the cpu is even more sensative to heat)
    Folding for Team 32


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts