Results 1 to 17 of 17
Thread: 6800 GT -> 6800 Ultra Extreme
08-19-04, 12:34 AM #1
6800 GT -> 6800 Ultra Extreme
I saw someone post this on another board:
I flashed the bios of my 6800 GT to the EVGA 6800 ultra extreme just now. I'm cooling the thing with my Koolance EXOS. The flashing process was flawless. The computer registers it as an ultra but it has the ultra extreme clocks.
I just ran 3dmark 2003 and I got 12,757 points... which i assume is good. I'm gonna try it again when i put my CPU at 3.6 GHz rather than 3. If you have a solid cooling for your 6800 GT i definitely suggest flashing it's bios to the ultra extreme... i didn't notice any artifacts or anything it wasn't even difficult. I got the bios files here: http://www.mvktech.net/download.php
UPDATE: Stock clocks of the:
6800 GT - 350 mhz/core 1000 mhz/mem
6800 Ultra - 400 mhz/core 1100 mhz/mem
6800 Ultra OC - 425 mhz/core 1100 mhz/mem
6800 Ultra Extreme - 450 mhz/core 1200 mhz/mem
If you can get the 6800 GT to clock to the speed of an Ultra, how much can you OC a Ultra or an Ultra Extreme for that matter?
Last edited by nissmo300; 08-19-04 at 12:51 AM.
08-19-04, 12:42 AM #2
6800 gt 350mhz/core 1.0ghz/mem
6800 Ultra 400mhz/core 1.1ghz/mem
6800 Ultra Extreme 450mhz/core 1.2ghz/mem (clocks may vary)
08-19-04, 12:49 AM #3
Thanks AVG, thats helpful. Now we need to find some people who own any of these and see how far they can OC them.
08-19-04, 01:21 AM #4
- Join Date
- May 2002
How high were you able to o/c the before flashing to Ultra extreme?
08-19-04, 01:22 AM #5
It's not mine, I said I found this post in another forum. Has anyone tried flash their 6800 GT with the bios of a 6800 Ultra Extreme?
08-19-04, 02:16 AM #6
My PNY maxes out around 430/1.25 but that's without any flashes. I'm getting around 13k on 3dmark03. I don't think I want to flash up, I don't really think it gives that much of a perf boost, versus what it could do to the card. There is overclocking and then there is reckless abandon. I don't want to end up with a paperweight.
08-19-04, 02:22 AM #7My PNY maxes out around 430/1.25 but that's without any flashes.
EDIT: By the way what is the temp on it?
08-19-04, 03:25 AM #8
- Join Date
- May 2004
- Broonlyn, NY
my PNY goes up to 440/1110 on stock
And it dosent get too hot over 75 i think.
08-19-04, 08:38 AM #9Originally Posted by nissmo300
08-19-04, 09:38 AM #10
My BFG GT will only go up to 426/1.07 water cooled at 40C. I may have just got a poor overclocker although i am happy with its performance. I have been able to go up a bit at a time with riva tuner, maybe the AS5 needs to cure a bit. I would highly recommend testing before doing this.
08-19-04, 10:21 AM #11Originally Posted by Nandro
08-19-04, 10:32 AM #12
08-19-04, 10:53 AM #13
08-19-04, 11:20 AM #14
- Join Date
- Apr 2004
i have the reference BFG GT as well, modded my GT bios to give 1.4v and set clocks to 425/1.12, i am now able to max out at 450/1.18, custom cooled
hey Nandro, what water block are you using?
08-19-04, 12:04 PM #15
How safe/unsafe is flashing your vid bios?
Can you flash back to the original bios if you choose?
08-19-04, 12:06 PM #16
You can flash back to the original bios, but you'll need an pci video card to boot from, but sometimes that's not possible and you'll end up with a really expensive paperweight.
08-19-04, 08:22 PM #17
I like testing with vgabios.exe prior to actually flashing. At least I am relatively assured of being able to flash back.
Xeons 1.6LV at 3.2Ghz
3000+ (754) at 2.5Ghz
2800+ (754) at 2.5Ghz
P4 2.8C-478 at 3.4Ghz
Celeron 315D at 3.4Ghz
Celeron 310D at 3.0Ghz
Celeron 335D at 3.7Ghz
Celeron 315D at 2.8Ghz
C2D E6300 at 3.2Ghz
C2D E6300 at 3.0Ghz
FOLDING FOR TEAM 32 - 30.7 Ghz
Avatar by Shocker - Many Thanks Sir!