My quest to run 1:1 (Memory Advise Needed)

mattspalace · Nov 20, 2004

Are you sticking with a 9x multiplier?

Osirus · Nov 20, 2004

yes.. I get the best overall performance with the 9x multi

mattspalace · Nov 20, 2004

Sounds like a good plan since you've tested it thoroughly.

So if you go with the mushkin. I would start at a 300FSB assigned to the CPU, and set a divider that gets the memory ~250FSB, then you'll have to start playing with the divider and FSB until you get a max 1:1 - or hell you could just go to 3-4-4-11, set a 1:1 ratio and start around 270FSB then start going up until you have probs getting into windows, then start backing off - when it seems stable, run a memtest.

mattspalace · Nov 20, 2004

If you can wait a few days, I'll lower my multiplier and see how fast this memory will go.

Osirus · Nov 20, 2004

Thanks for the tips. I might email Mushkin and see if i can find out what chips are in the PC4000

mattspalace · Nov 20, 2004

They do have a smaller support forum, they might have it posted in there.

Osirus · Nov 20, 2004

nice..
*runs off to check it out*

mattspalace · Nov 20, 2004

Cool, if you find out lemme know.. I haven't heard much about their PC4000 in a long time.

My quest to run 1:1 (Memory Advise Needed)

mattspalace

I been Dolk'ed Senior

Osirus

Member

mattspalace

I been Dolk'ed Senior

mattspalace

I been Dolk'ed Senior

Osirus

Member

mattspalace

I been Dolk'ed Senior

Osirus

Member

mattspalace

I been Dolk'ed Senior

Similar threads