- Joined
- Sep 4, 2001
I have a P III on an abit va6 board
I need to verify which sensor reading in MBM ver 5.08
will give a correct reading for the intel internal cpu temp sensor.
I currently am using
"ite8712f-3 diode"
and am getting a 109 F reading while my board temp reads 86 F and the abit sensor on the heat sink reads 98f
the bios tembs cpu and system match the 2 sensors listed above
98f and 86f.
I know that i should have 3 temp readings, system board, the abit supplied sensor (on the heat sink) and the intel internal cpu sensor. any help would be appreciated.
Remember :
no matter where ya go
There Ya are
I need to verify which sensor reading in MBM ver 5.08
will give a correct reading for the intel internal cpu temp sensor.
I currently am using
"ite8712f-3 diode"
and am getting a 109 F reading while my board temp reads 86 F and the abit sensor on the heat sink reads 98f
the bios tembs cpu and system match the 2 sensors listed above
98f and 86f.
I know that i should have 3 temp readings, system board, the abit supplied sensor (on the heat sink) and the intel internal cpu sensor. any help would be appreciated.
Remember :
no matter where ya go
There Ya are